4 * Copyright (C) 1992-1997, Thomas G. Lane.
5 * This file is part of the Independent JPEG Group's software.
6 * For conditions of distribution and use, see the accompanying README file.
8 * jmemmac.c provides an Apple Macintosh implementation of the system-
9 * dependent portion of the JPEG memory manager.
11 * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
12 * JPEG_INTERNALS part of jconfig.h.
14 * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
15 * instead of malloc and free. It accurately determines the amount of
16 * memory available by using CompactMem. Notice that if left to its
17 * own devices, this code can chew up all available space in the
18 * application's zone, with the exception of the rather small "slop"
19 * factor computed in jpeg_mem_available(). The application can ensure
20 * that more space is left over by reducing max_memory_to_use.
22 * Large images are swapped to disk using temporary files and System 7.0+'s
23 * temporary folder functionality.
25 * Note that jmemmac.c depends on two features of MacOS that were first
26 * introduced in System 7: FindFolder and the FSSpec-based calls.
27 * If your application uses jmemmac.c and is run under System 6 or earlier,
28 * and the jpeg library decides it needs a temporary file, it will abort,
29 * printing error messages about requiring System 7. (If no temporary files
30 * are created, it will run fine.)
32 * If you want to use jmemmac.c in an application that might be used with
33 * System 6 or earlier, then you should remove dependencies on FindFolder
34 * and the FSSpec calls. You will need to replace FindFolder with some
35 * other mechanism for finding a place to put temporary files, and you
36 * should replace the FSSpec calls with their HFS equivalents:
38 * FSpDelete -> HDelete
39 * FSpGetFInfo -> HGetFInfo
40 * FSpCreate -> HCreate
41 * FSpOpenDF -> HOpen *** Note: not HOpenDF ***
42 * FSMakeFSSpec -> (fill in spec by hand.)
44 * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen,
45 * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the
46 * ages-old problem of names starting with a period.)
48 * Contributed by Sam Bushell (jsam@iagu.on.net) and
49 * Dan Gildor (gyld@in-touch.com).
52 #define JPEG_INTERNALS
55 #include "jmemsys.h" /* import the system-dependent declarations */
57 #ifndef USE_MAC_MEMMGR /* make sure user got configuration right */
58 You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
61 #include <Memory.h> /* we use the MacOS memory manager */
62 #include <Files.h> /* we use the MacOS File stuff */
63 #include <Folders.h> /* we use the MacOS HFS stuff */
64 #include <Script.h> /* for smSystemScript */
65 #include <Gestalt.h> /* we use Gestalt to test for specific functionality */
67 #ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */
68 #define TEMP_FILE_NAME "JPG%03d.TMP"
71 static int next_file_num; /* to distinguish among several temp files */
75 * Memory allocation and freeing are controlled by the MacOS library
76 * routines NewPtr() and DisposePtr(), which allocate fixed-address
77 * storage. Unfortunately, the IJG library isn't smart enough to cope
78 * with relocatable storage.
82 jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
84 return (void *) NewPtr(sizeofobject);
88 jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
90 DisposePtr((Ptr) object);
95 * "Large" objects are treated the same as "small" ones.
96 * NB: we include FAR keywords in the routine declarations simply for
97 * consistency with the rest of the IJG code; FAR should expand to empty
98 * on rational architectures like the Mac.
102 jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
104 return (void FAR *) NewPtr(sizeofobject);
108 jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
110 DisposePtr((Ptr) object);
115 * This routine computes the total memory space available for allocation.
119 jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
120 long max_bytes_needed, long already_allocated)
122 long limit = cinfo->mem->max_memory_to_use - already_allocated;
125 /* Don't ask for more than what application has told us we may use */
126 if (max_bytes_needed > limit && limit > 0)
127 max_bytes_needed = limit;
128 /* Find whether there's a big enough free block in the heap.
129 * CompactMem tries to create a contiguous block of the requested size,
130 * and then returns the size of the largest free block (which could be
131 * much more or much less than we asked for).
132 * We add some slop to ensure we don't use up all available memory.
134 slop = max_bytes_needed / 16 + 32768L;
135 mem = CompactMem(max_bytes_needed + slop) - slop;
137 mem = 0; /* sigh, couldn't even get the slop */
138 /* Don't take more than the application says we can have */
139 if (mem > limit && limit > 0)
146 * Backing store (temporary file) management.
147 * Backing store objects are only used when the value returned by
148 * jpeg_mem_available is less than the total space needed. You can dispense
149 * with these routines if you have plenty of virtual memory; see jmemnobs.c.
154 read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
155 void FAR * buffer_address,
156 long file_offset, long byte_count)
158 long bytes = byte_count;
161 if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
162 ERREXIT(cinfo, JERR_TFILE_SEEK);
164 retVal = FSRead ( info->temp_file, &bytes,
165 (unsigned char *) buffer_address );
166 if ( retVal != noErr || bytes != byte_count )
167 ERREXIT(cinfo, JERR_TFILE_READ);
172 write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
173 void FAR * buffer_address,
174 long file_offset, long byte_count)
176 long bytes = byte_count;
179 if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
180 ERREXIT(cinfo, JERR_TFILE_SEEK);
182 retVal = FSWrite ( info->temp_file, &bytes,
183 (unsigned char *) buffer_address );
184 if ( retVal != noErr || bytes != byte_count )
185 ERREXIT(cinfo, JERR_TFILE_WRITE);
190 close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
192 FSClose ( info->temp_file );
193 FSpDelete ( &(info->tempSpec) );
198 * Initial opening of a backing-store object.
200 * This version uses FindFolder to find the Temporary Items folder,
201 * and puts the temporary file in there.
205 jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
206 long total_bytes_needed)
208 short tmpRef, vRefNum;
214 long gestaltResponse = 0;
216 /* Check that FSSpec calls are available. */
217 osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
218 if ( ( osErr != noErr )
219 || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
220 ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
221 /* TO DO: add a proper error message to jerror.h. */
223 /* Check that FindFolder is available. */
224 osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
225 if ( ( osErr != noErr )
226 || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
227 ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
228 /* TO DO: add a proper error message to jerror.h. */
230 osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
232 if ( osErr != noErr )
233 ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
234 /* TO DO: Try putting the temp files somewhere else. */
236 /* Keep generating file names till we find one that's not in use */
238 next_file_num++; /* advance counter */
240 sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
241 strcpy ( (Ptr)fName+1, info->temp_name );
242 *fName = strlen (info->temp_name);
243 osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
245 if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
249 osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
250 if ( osErr != noErr )
251 ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
253 osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
254 if ( osErr != noErr )
255 ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
257 info->tempSpec = theSpec;
259 info->read_backing_store = read_backing_store;
260 info->write_backing_store = write_backing_store;
261 info->close_backing_store = close_backing_store;
262 TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
267 * These routines take care of any system-dependent initialization and
272 jpeg_mem_init (j_common_ptr cinfo)
276 /* max_memory_to_use will be initialized to FreeMem()'s result;
277 * the calling application might later reduce it, for example
278 * to leave room to invoke multiple JPEG objects.
279 * Note that FreeMem returns the total number of free bytes;
280 * it may not be possible to allocate a single block of this size.
286 jpeg_mem_term (j_common_ptr cinfo)