synfigapp::Settings& settings;
Gtk::Table options_table;
+ Gtk::Entry entry_id;
Gtk::CheckButton checkbutton_pressure_width;
Gtk::CheckButton checkbutton_round_ends;
Gtk::CheckButton checkbutton_auto_loop; // whether to loop new strokes which start and end in the same place
Gtk::CheckButton checkbutton_auto_extend; // whether to extend existing lines
Gtk::CheckButton checkbutton_auto_link; // whether to link new ducks to existing ducks
Gtk::CheckButton checkbutton_region_only;
+ Gtk::CheckButton checkbutton_auto_export;
Gtk::Button button_fill_last_stroke;
//pressure spinner and such
synfigapp::BLineConverter blineconv;
public:
+ synfig::String get_id()const { return entry_id.get_text(); }
+ void set_id(const synfig::String& x) { return entry_id.set_text(x); }
+
bool get_pressure_width_flag()const { return checkbutton_pressure_width.get_active(); }
void set_pressure_width_flag(bool x) { return checkbutton_pressure_width.set_active(x); }
bool get_region_only_flag()const { return checkbutton_region_only.get_active(); }
void set_region_only_flag(bool x) { return checkbutton_region_only.set_active(x); }
+ bool get_auto_export_flag()const { return checkbutton_auto_export.get_active(); }
+ void set_auto_export_flag(bool x) { return checkbutton_auto_export.set_active(x); }
+
Real get_min_pressure() const { return adj_min_pressure.get_value(); }
void set_min_pressure(Real x) { return adj_min_pressure.set_value(x); }
void load_settings();
void save_settings();
+ void increment_id();
Smach::event_result event_stop_handler(const Smach::event& x);
{
String value;
+ if(settings.get_value("draw.id",value))
+ set_id(value);
+ else
+ set_id("NewDrawing");
+
if(settings.get_value("draw.pressure_width",value) && value=="0")
set_pressure_width_flag(false);
else
else
set_region_only_flag(false);
+ if(settings.get_value("draw.auto_export",value) && value=="1")
+ set_auto_export_flag(true);
+ else
+ set_auto_export_flag(false);
+
if(settings.get_value("draw.min_pressure_on",value) && value=="0")
set_min_pressure_flag(false);
else
void
StateDraw_Context::save_settings()
{
+ settings.set_value("draw.id",get_id().c_str());
settings.set_value("draw.pressure_width",get_pressure_width_flag()?"1":"0");
settings.set_value("draw.auto_loop",get_auto_loop_flag()?"1":"0");
settings.set_value("draw.auto_extend",get_auto_extend_flag()?"1":"0");
settings.set_value("draw.auto_link",get_auto_link_flag()?"1":"0");
settings.set_value("draw.region_only",get_region_only_flag()?"1":"0");
+ settings.set_value("draw.auto_export",get_auto_export_flag()?"1":"0");
settings.set_value("draw.min_pressure",strprintf("%f",get_min_pressure()));
settings.set_value("draw.feather",strprintf("%f",get_feather()));
settings.set_value("draw.min_pressure_on",get_min_pressure_flag()?"1":"0");
settings.set_value("draw.localize",get_local_error_flag()?"1":"0");
}
+void
+StateDraw_Context::increment_id()
+{
+ String id(get_id());
+ int number=1;
+ int digits=0;
+
+ if(id.empty())
+ id="Drawing";
+
+ // If there is a number
+ // already at the end of the
+ // id, then remove it.
+ if(id[id.size()-1]<='9' && id[id.size()-1]>='0')
+ {
+ // figure out how many digits it is
+ for(digits=0;(int)id.size()-1>=digits && id[id.size()-1-digits]<='9' && id[id.size()-1-digits]>='0';digits++)while(false);
+
+ String str_number;
+ str_number=String(id,id.size()-digits,id.size());
+ id=String(id,0,id.size()-digits);
+ synfig::info("---------------- \"%s\"",str_number.c_str());
+
+ number=atoi(str_number.c_str());
+ }
+ else
+ {
+ number=1;
+ digits=3;
+ }
+
+ number++;
+
+ // Add the number back onto the id
+ {
+ const String format(strprintf("%%0%dd",digits));
+ id+=strprintf(format.c_str(),number);
+ }
+
+ // Set the ID
+ set_id(id);
+}
+
StateDraw_Context::StateDraw_Context(CanvasView* canvas_view):
canvas_view_(canvas_view),
is_working(*canvas_view),
loop_(false),
- prev_workarea_layer_status_(get_work_area()->allow_layer_clicks),
+ prev_workarea_layer_status_(get_work_area()->get_allow_layer_clicks()),
settings(synfigapp::Main::get_selected_input_device()->settings()),
+ entry_id(),
checkbutton_pressure_width(_("Pressure Width")),
checkbutton_auto_loop(_("Auto Loop")),
checkbutton_auto_extend(_("Auto Extend")),
checkbutton_auto_link(_("Auto Link")),
checkbutton_region_only(_("Create Region Only")),
+ checkbutton_auto_export(_("Auto Export")),
button_fill_last_stroke(_("Fill Last Stroke")),
adj_min_pressure(0,0,1,0.01,0.1),
spin_min_pressure(adj_min_pressure,0.1,3),
UpdateErrorBox();
//options_table.attach(*manage(new Gtk::Label(_("Draw Tool"))), 0, 2, 0, 1, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(checkbutton_pressure_width, 0, 2, 1, 2, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(checkbutton_auto_loop, 0, 2, 2, 3, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(checkbutton_auto_extend, 0, 2, 3, 4, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(checkbutton_auto_link, 0, 2, 4, 5, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(checkbutton_region_only, 0, 2, 5, 6, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(entry_id, 0, 2, 1, 2, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_pressure_width,0, 2, 2, 3, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_auto_loop, 0, 2, 3, 4, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_auto_extend, 0, 2, 4, 5, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_auto_link, 0, 2, 5, 6, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_region_only, 0, 2, 6, 7, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(checkbutton_auto_export, 0, 2, 7, 8, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(check_min_pressure, 0, 2, 6, 7, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(spin_min_pressure, 0, 2, 7, 8, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(check_min_pressure, 0, 2, 8, 9, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(spin_min_pressure, 0, 2, 9, 10, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(*manage(new Gtk::Label(_("Feather"))), 0, 1, 8, 9, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(spin_feather, 1, 2, 8, 9, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(*manage(new Gtk::Label(_("Feather"))), 0, 1, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(spin_feather, 1, 2, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(check_localerror, 0, 2, 9, 10, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(*manage(new Gtk::Label(_("Smooth"))), 0, 1, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- options_table.attach(spin_globalthres, 1, 2, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(check_localerror, 0, 2, 11, 12, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(*manage(new Gtk::Label(_("Smooth"))), 0, 1, 12, 13, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ options_table.attach(spin_globalthres, 1, 2, 12, 13, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
- //options_table.attach(button_fill_last_stroke, 0, 2, 11, 12, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
+ //options_table.attach(button_fill_last_stroke, 0, 2, 13, 14, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
button_fill_last_stroke.signal_pressed().connect(sigc::mem_fun(*this,&StateDraw_Context::fill_last_stroke));
check_localerror.signal_toggled().connect(sigc::mem_fun(*this,&StateDraw_Context::UpdateErrorBox));
get_work_area()->set_type_mask(Duck::TYPE_ALL-Duck::TYPE_TANGENT-Duck::TYPE_WIDTH);
// Turn off layer clicking
- get_work_area()->allow_layer_clicks=false;
+ get_work_area()->set_allow_layer_clicks(false);
// Turn off duck clicking
- get_work_area()->allow_duck_clicks=false;
+ get_work_area()->set_allow_duck_clicks(false);
// clear out the ducks
//get_work_area()->clear_ducks();
}
Smach::event_result
-StateDraw_Context::event_refresh_tool_options(const Smach::event& x)
+StateDraw_Context::event_refresh_tool_options(const Smach::event& /*x*/)
{
refresh_tool_options();
return Smach::RESULT_ACCEPT;
get_canvas_view()->work_area->reset_cursor();
// Restore layer clicking
- get_work_area()->allow_layer_clicks=prev_workarea_layer_status_;
+ get_work_area()->set_allow_layer_clicks(prev_workarea_layer_status_);
// Restore duck clicking
- get_work_area()->allow_duck_clicks=true;
+ get_work_area()->set_allow_duck_clicks(true);
// Enable the time bar
get_canvas_view()->set_sensitive_timebar(true);
}
Smach::event_result
-StateDraw_Context::event_stop_handler(const Smach::event& x)
+StateDraw_Context::event_stop_handler(const Smach::event& /*x*/)
{
throw Smach::egress_exception();
}
Smach::event_result
-StateDraw_Context::event_refresh_handler(const Smach::event& x)
+StateDraw_Context::event_refresh_handler(const Smach::event& /*x*/)
{
refresh_ducks();
return Smach::RESULT_ACCEPT;
return Smach::RESULT_ACCEPT;
}
- case BUTTON_RIGHT: // Intercept the right-button click to short-circut the pop-up menu
+ case BUTTON_RIGHT: // Intercept the right-button click to short-circuit the pop-up menu
return Smach::RESULT_ACCEPT;
default:
bool extend_start=false,extend_finish=false,complete_loop=false;
bool extend_start_join_same=false,extend_start_join_different=false;
bool extend_finish_join_same=false,extend_finish_join_different=false;
- int start_duck_index,finish_duck_index;
+ int start_duck_index = 0,finish_duck_index = 0; // initialized to keep the compiler happy; shouldn't be needed though
ValueNode_BLine::Handle start_duck_value_node_bline=NULL,finish_duck_value_node_bline=NULL;
// Find any ducks at the start or end that we might attach to
- // (this used to only run if we aren't a loop - ie. !loop_bline_flag
+ // (this used to only run if we didn't just draw a loop - ie. !loop_bline_flag
// but having loops auto-connect can be useful as well)
if(get_auto_extend_flag() || get_auto_link_flag())
{
if(start_duck)do
{
if(!(start_duck_value_desc=start_duck->get_value_desc()))break;
- if(loop_bline_flag)break;
+ if(loop_bline_flag)break; // loops don't extend anything
if(!start_duck_value_desc.parent_is_value_node())break;
- start_duck_index=start_duck_value_desc.get_index();
+ start_duck_index=start_duck_value_desc.get_index(); // which point on the line did we start drawing at
start_duck_value_node_bline=ValueNode_BLine::Handle::cast_dynamic(start_duck_value_desc.get_parent_value_node());
if(!get_auto_extend_flag())break;
// don't extend looped blines
if(start_duck_value_node_bline&&!start_duck_value_node_bline->get_loop()&&
+ // did we start drawing at either end of the line?
(start_duck_index==0||start_duck_index==start_duck_value_node_bline->link_count()-1))
{
extend_start=true;
Smach::event_result result;
synfig::ValueNode_DynamicList::ListEntry source;
- int target_index;
// the new line's start extends an existing line
if(extend_start)
{
+ int target_offset = 0;
if(complete_loop)trans_bline.pop_back();
trans_bline.pop_front();
if(start_duck_index==0)
reverse_bline(trans_bline);
result=extend_bline_from_begin(start_duck_value_node_bline,trans_bline,complete_loop);
source=start_duck_value_node_bline->list.front();
- target_index=trans_bline.size()+finish_duck_index;
+ target_offset=trans_bline.size();
}
else
{
result=extend_bline_from_end(start_duck_value_node_bline,trans_bline,complete_loop);
source=start_duck_value_node_bline->list.back();
- target_index=finish_duck_index;
}
if(extend_start_join_different)
else if(extend_start_join_same)
LinkableValueNode::Handle::cast_dynamic(source.value_node)->
set_link(0,synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(start_duck_value_node_bline->
- list[target_index].value_node),0).get_value_node());
+ list[target_offset+finish_duck_index].value_node),0).get_value_node());
return result;
}
// the new line's end extends an existing line
if(extend_finish)
- { // SPECIAL CASE -- EXTENSION
+ {
+ int target_offset = 0;
trans_bline.pop_back();
if(finish_duck_index==0)
{
result=extend_bline_from_begin(finish_duck_value_node_bline,trans_bline,false);
source=finish_duck_value_node_bline->list.front();
- target_index=trans_bline.size()+start_duck_index;
+ target_offset=trans_bline.size();
}
else
{ // We need to reverse the BLine first.
reverse_bline(trans_bline);
result=extend_bline_from_end(finish_duck_value_node_bline,trans_bline,false);
source=finish_duck_value_node_bline->list.back();
- target_index=start_duck_index;
}
if(extend_finish_join_different)
else if(extend_finish_join_same)
LinkableValueNode::Handle::cast_dynamic(source.value_node)->
set_link(0,synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(finish_duck_value_node_bline->
- list[target_index].value_node),0).get_value_node());
+ list[target_offset+start_duck_index].value_node),0).get_value_node());
return result;
}
LinkableValueNode::Handle::cast_dynamic(value_node->list.back().value_node)->
set_link(0,finish_duck_value_desc.get_value_node());
+ if(get_auto_export_flag()) {
+ printf("this is where we would export the new line\n");
+ if (!get_canvas_interface()->add_value_node(value_node,get_id()))
+ {
+ /* it's no big deal, is it? let's keep the shape anyway */
+ // get_canvas_view()->get_ui_interface()->error(_("Unable to add value node"));
+ // group.cancel();
+ // increment_id();
+ // return Smach::RESULT_ERROR;
+ }
+ }
+
// Create the layer
{
Layer::Handle layer;
synfigapp::PushMode push_mode(get_canvas_interface(),synfigapp::MODE_NORMAL);
if(get_region_only_flag())
+ {
layer=get_canvas_interface()->add_layer_to("region",canvas,depth);
+ layer->set_description(get_id()+_(" Region"));
+ }
else
+ {
layer=get_canvas_interface()->add_layer_to("outline",canvas,depth);
+ layer->set_description(get_id()+_(" Outline"));
+ }
if(get_feather())
{
{
get_canvas_view()->get_ui_interface()->error(_("Unable to create layer"));
group.cancel();
+ increment_id();
//refresh_ducks();
return Smach::RESULT_ERROR;
}
//refresh_ducks();
}
+ increment_id();
last_stroke=value_node;
return Smach::RESULT_ACCEPT;
}