/*! \file blineconvert.cpp
** \brief Template File
**
-** $Id: blineconvert.cpp,v 1.1.1.1 2005/01/07 03:34:37 darco Exp $
+** $Id$
**
** \legal
-** Copyright (c) 2002 Robert B. Quattlebaum Jr.
+** Copyright (c) 2002-2005 Robert B. Quattlebaum Jr., Adrian Bentley
**
-** This software and associated documentation
-** are CONFIDENTIAL and PROPRIETARY property of
-** the above-mentioned copyright holder.
+** This package is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
**
-** You may not copy, print, publish, or in any
-** other way distribute this software without
-** a prior written agreement with
-** the copyright holder.
+** This package is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+** General Public License for more details.
** \endlegal
*/
/* ========================================================================= */
#include <synfig/general.h>
#include <cassert>
-
-
#endif
/* === U S I N G =========================================================== */
template < class T >
inline void FivePointdt(T &df, const T &f1, const T &f2, const T &f3, const T &f4, const T &f5, int bias)
{
- if(bias == 0)
- {
- //middle
+ if (bias == 0) // middle
df = (f1 - f2*8 + f4*8 - f5)*(1/12.0f);
- }else if(bias < 0)
- {
- //left
+ else if (bias < 0) // left
df = (-f1*25 + f2*48 - f3*36 + f4*16 - f5*3)*(1/12.0f);
- }else
- {
- //right
+ else // right
df = (f1*3 - f2*16 + f3*36 - f4*48 + f5*25)*(1/12.0f);
- }
}
template < class T >
inline void ThreePointdt(T &df, const T &f1, const T &f2, const T &f3, int bias)
{
- if(bias == 0)
- {
- //middle
+ if (bias == 0) // middle
df = (-f1 + f3)*(1/2.0f);
- }else if(bias < 0)
- {
- //left
+ else if (bias < 0) // left
df = (-f1*3 + f2*4 - f3)*(1/2.0f);
- }else
- {
- //right
+ else // right
df = (f1 - f2*4 + f3*3)*(1/2.0f);
- }
}
-template < class T >
-inline void ThreePointddt(T &df, const T &f1, const T &f2, const T &f3, int bias)
-{
- //a 3 point approximation pretends to have constant acceleration, so only one algorithm needed for left, middle, or right
- df = (f1 -f2*2 + f3)*(1/2.0f);
-}
-
-// WARNING -- totaly broken
-template < class T >
-inline void FivePointddt(T &df, const T &f1, const T &f2, const T &f3, int bias)
-{
- if(bias == 0)
- {
- assert(0); // !?
- //middle
- //df = (- f1 + f2*16 - f3*30 + f4*16 - f5)*(1/12.0f);
- }/*else if(bias < 0)
- {
- //left
- df = (f1*7 - f2*26*4 + f3*19*6 - f4*14*4 + f5*11)*(1/12.0f);
- }else
- {
- //right
- df = (f1*3 - f2*16 + f3*36 - f4*48 + f5*25)*(1/12.0f);
- }*/
- //side ones don't work, use 3 point
-}
-
-//implement an arbitrary derivative
-//dumb algorithm
-template < class T >
-void DerivativeApprox(T &df, const T f[], const Real t[], int npoints, int indexval)
-{
- /*
- Lj(x) = PI_i!=j (x - xi) / PI_i!=j (xj - xi)
-
- so Lj'(x) = SUM_k PI_i!=j|k (x - xi) / PI_i!=j (xj - xi)
- */
-
- unsigned int i,j,k,i0,i1;
-
- Real Lpj,mult,div,tj;
- Real tval = t[indexval];
-
- //sum k
- for(j=0;j<npoints;++j)
- {
- Lpj = 0;
- div = 1;
- tj = t[j];
-
- for(k=0;k<npoints;++k)
- {
- if(k != j) //because there is no summand for k == j, since that term is missing from the original equation
- {
- //summation for k
- for(i=0;i<npoints;++i)
- {
- if(i != k)
- {
- mult *= tval - t[i];
- }
- }
-
- Lpj += mult; //add into the summation
-
- //since the ks follow the exact patern we need for the divisor (use that too)
- div *= tj - t[k];
- }
- }
-
- //get the actual coefficient
- Lpj /= div;
-
- //add it in to the equation
- df += f[j]*Lpj;
- }
-}
+// template < class T >
+// inline void ThreePointddt(T &df, const T &f1, const T &f2, const T &f3, int bias)
+// {
+// // a 3 point approximation pretends to have constant acceleration,
+// // so only one algorithm needed for left, middle, or right
+// df = (f1 -f2*2 + f3)*(1/2.0f);
+// }
+//
+// // WARNING -- totally broken
+// template < class T >
+// inline void FivePointddt(T &df, const T &f1, const T &f2, const T &f3, int bias)
+// {
+// if(bias == 0)
+// {
+// assert(0); // !?
+// //middle
+// //df = (- f1 + f2*16 - f3*30 + f4*16 - f5)*(1/12.0f);
+// }/*else if(bias < 0)
+// {
+// //left
+// df = (f1*7 - f2*26*4 + f3*19*6 - f4*14*4 + f5*11)*(1/12.0f);
+// }else
+// {
+// //right
+// df = (f1*3 - f2*16 + f3*36 - f4*48 + f5*25)*(1/12.0f);
+// }*/
+// //side ones don't work, use 3 point
+// }
+//
+// //implement an arbitrary derivative
+// //dumb algorithm
+// template < class T >
+// void DerivativeApprox(T &df, const T f[], const Real t[], int npoints, int indexval)
+// {
+// /*
+// Lj(x) = PI_i!=j (x - xi) / PI_i!=j (xj - xi)
+//
+// so Lj'(x) = SUM_k PI_i!=j|k (x - xi) / PI_i!=j (xj - xi)
+// */
+//
+// unsigned int i,j,k,i0,i1;
+//
+// Real Lpj,mult,div,tj;
+// Real tval = t[indexval];
+//
+// //sum k
+// for(j=0;j<npoints;++j)
+// {
+// Lpj = 0;
+// div = 1;
+// tj = t[j];
+//
+// for(k=0;k<npoints;++k)
+// {
+// if(k != j) //because there is no summand for k == j, since that term is missing from the original equation
+// {
+// //summation for k
+// for(i=0;i<npoints;++i)
+// {
+// if(i != k)
+// {
+// mult *= tval - t[i];
+// }
+// }
+//
+// Lpj += mult; //add into the summation
+//
+// //since the ks follow the exact pattern we need for the divisor (use that too)
+// div *= tj - t[k];
+// }
+// }
+//
+// //get the actual coefficient
+// Lpj /= div;
+//
+// //add it in to the equation
+// df += f[j]*Lpj;
+// }
+// }
//END numerical derivatives
-template < class T >
-inline int sign(T f, T tol)
-{
- if(f < -tol) return -1;
- if(f > tol) return 1;
- return 0;
-}
+// template < class T >
+// inline int sign(T f, T tol)
+// {
+// if(f < -tol) return -1;
+// if(f > tol) return 1;
+// return 0;
+// }
void GetFirstDerivatives(const std::vector<synfig::Point> &f, unsigned int left, unsigned int right, char *out, unsigned int dfstride)
{
if(right - left < 2)
return;
- else if(right - left < 3)
+ else if(right - left == 2)
{
synfig::Vector v = f[left+1] - f[left];
-
+
//set both to the one we want
*(synfig::Vector*)out = v;
out += dfstride;
{
//left then middle then right
ThreePointdt(*(synfig::Vector*)out,f[left+0], f[left+1], f[left+2], -1);
- current += 1;
+ current++;
out += dfstride;
-
+
for(;current < right-1; current++, out += dfstride)
- {
ThreePointdt(*(synfig::Vector*)out,f[current-1], f[current], f[current+1], 0);
- }
ThreePointdt(*(synfig::Vector*)out,f[right-3], f[right-2], f[right-1], 1);
current++;
out += dfstride;
-
+
}else //can use 5 point
{
//left 2 then middle bunch then right two
//may want to use 3 point for inner edge ones
-
+
FivePointdt(*(synfig::Vector*)out,f[left+0], f[left+1], f[left+2], f[left+3], f[left+4], -2);
out += dfstride;
FivePointdt(*(synfig::Vector*)out,f[left+1], f[left+2], f[left+3], f[left+4], f[left+5], -1);
out += dfstride;
current += 2;
-
+
for(;current < right-2; current++, out += dfstride)
- {
FivePointdt(*(synfig::Vector*)out,f[current-2], f[current-1], f[current], f[current+1], f[current+2], 0);
- }
FivePointdt(*(synfig::Vector*)out,f[right-5], f[right-4], f[right-3], f[right-2], f[right-1], 1);
out += dfstride;
- FivePointdt(*(synfig::Vector*)out,f[right-6], f[right-5], f[right-4], f[right-3], f[right-2], 2);
+ FivePointdt(*(synfig::Vector*)out,f[right-6], f[right-5], f[right-4], f[right-3], f[right-2], 2);
out += dfstride;
current += 2;
}
}
-void GetSimpleDerivatives(const std::vector<synfig::Point> &f, int left, int right,
+void GetSimpleDerivatives(const std::vector<synfig::Point> &f, int left, int right,
std::vector<synfig::Point> &df, int outleft,
- const std::vector<synfig::Real> &di)
+ const std::vector<synfig::Real> &/*di*/)
{
int i1,i2,i;
int offset = 2; //df = 1/2 (f[i+o]-f[i-o])
-
+
assert((int)df.size() >= right-left+outleft); //must be big enough
-
+
for(i = left; i < right; ++i)
{
//right now indices (figure out distance later)
i1 = std::max(left,i-offset);
i2 = std::max(left,i+offset);
-
+
df[outleft++] = (f[i2] - f[i1])*0.5f;
}
}
Real CurveError(const synfig::Point *pts, unsigned int n, std::vector<synfig::Point> &work, int left, int right)
{
if(right-left < 2) return -1;
-
+
int i,j;
-
+
//get distances to each point
Real d,dtemp,dsum;
//synfig::Vector v,vt;
//synfig::Point p1,p2;
synfig::Point pi;
std::vector<synfig::Point>::const_iterator it;//,end = work.begin()+right;
-
+
//unsigned int size = work.size();
-
+
//for each line, get distance
d = 0; //starts at 0
for(i = 0; i < (int)n; ++i)
- {
+ {
pi = pts[i];
-
+
dsum = FLT_MAX;
-
+
it = work.begin()+left;
//p2 = *it++; //put it at left+1
for(j = left/*+1*/; j < right; ++j,++it)
{
/*p1 = p2;
p2 = *it;
-
- v = p2 - p1;
+
+ v = p2 - p1;
vt = pi - p1;
-
+
dtemp = v.mag_squared() > 1e-12 ? (vt*v)/v.mag_squared() : 0; //get the projected time value for the current line
-
- //get distance to line segment with the time value clamped 0-1
+
+ //get distance to line segment with the time value clamped 0-1
if(dtemp >= 1) //use p+v
{
- vt += v; //makes it pp - (p+v)
+ vt += v; //makes it pp - (p+v)
}else if(dtemp > 0) //use vt-proj
{
vt -= v*dtemp; // vt - proj_v(vt) //must normalize the projection vector to work
}
-
+
//else use p
dtemp = vt.mag_squared();*/
-
- dtemp = (pi - *it).mag_squared();
+
+ dtemp = (pi - *it).mag_squared();
if(dtemp < dsum)
dsum = dtemp;
}
-
+
//accumulate the points' min distance from the curve
d += sqrt(dsum);
}
-
+
return d;
}
typedef synfigapp::BLineConverter::cpindex cpindex;
//has the index data and the tangent scale data (relevant as it may be)
-int tesselate_curves(const std::vector<cpindex> &inds, const std::vector<Point> &f, const std::vector<synfig::Vector> &df, std::vector<Point> &work)
+int tessellate_curves(const std::vector<cpindex> &inds, const std::vector<Point> &f, const std::vector<synfig::Vector> &df, std::vector<Point> &work)
{
if(inds.size() < 2)
return 0;
-
+
etl::hermite<Point> curve;
int ntess = 0;
-
+
std::vector<cpindex>::const_iterator j = inds.begin(),j2, end = inds.end();
-
+
unsigned int ibase = inds[0].curind;
-
+
j2 = j++;
for(; j != end; j2 = j++)
{
- //if this curve has invalid error (in j) then retesselate it's work points (requires reparametrization, etc.)
+ //if this curve has invalid error (in j) then retessellate its work points (requires reparametrization, etc.)
if(j->error < 0)
{
//get the stepsize etc. for the number of points in here
unsigned int n = j->curind - j2->curind + 1; //thats the number of points in the span
unsigned int k, kend, i0, i3;
//so reset the right chunk
-
+
Real t, dt = 1/(Real)(n*2-2); //assuming that they own only n points
-
+
//start at first intermediate
t = 0;
- i0 = j2->curind; i3 = j->curind;
+ i0 = j2->curind; i3 = j->curind;
k = (i0-ibase)*2; //start on first intermediary point (2x+1)
kend = (i3-ibase)*2; //last point to set (not intermediary)
-
+
//build hermite curve, it's easier
curve.p1() = f[i0];
curve.p2() = f[i3];
- curve.t1() = df[i0]*(df[i0].mag_squared() > 1e-4 ? j2->tangentscale/df[i0].mag() : j2->tangentscale);
- curve.t2() = df[i3]*(df[i3].mag_squared() > 1e-4 ? j->tangentscale/df[i3].mag() : j->tangentscale);
+ curve.t1() = df[i0-ibase] * (df[i0-ibase].mag_squared() > 1e-4
+ ? j2->tangentscale/df[i0-ibase].mag()
+ : j2->tangentscale);
+ curve.t2() = df[i3-ibase] * (df[i3-ibase].mag_squared() > 1e-4
+ ? j->tangentscale/df[i3-ibase].mag()
+ : j->tangentscale);
curve.sync();
-
+
//MUST include the end point (since we are ignoring left one)
for(; k < kend; ++k, t += dt)
{
work[k] = curve(t);
}
-
+
work[k] = curve(1); //k == kend, t == 1 -> c(t) == p2
++ntess;
}
}
-
+
return ntess;
}
width = 0;
};
-void
+void
synfigapp::BLineConverter::clear()
{
f.clear();
void
synfigapp::BLineConverter::operator () (std::list<synfig::BLinePoint> &out, const std::list<synfig::Point> &in,const std::list<synfig::Real> &in_w)
-{
+{
//Profiling information
/*etl::clock::value_type initialprocess=0, curveval=0, breakeval=0, disteval=0;
etl::clock::value_type preproceval=0, tesseval=0, erroreval=0, spliteval=0;
return;
clear();
-
+
//removing digitization error harder than expected
-
+
//intended to fix little pen errors caused by the way people draw (tiny juts in opposite direction)
//Different solutions
// Average at both end points (will probably eliminate many points at each end of the samples)
// Average after the break points are found (weird points would still affect the curve)
// Just always get rid of breaks at the beginning and end if they are a certain distance apart
// This is will be current approach so all we do now is try to remove duplicate points
-
+
//remove duplicate points - very bad for fitting
-
+
//timer.reset();
-
+
{
std::list<synfig::Point>::const_iterator i = in.begin(), end = in.end();
std::list<synfig::Real>::const_iterator iw = in_w.begin();
synfig::Point c;
-
+
if(in.size() == in_w.size())
{
for(;i != end; ++i,++iw)
- {
+ {
//eliminate duplicate points
if(*i != c)
{
}else
{
for(;i != end; ++i)
- {
+ {
//eliminate duplicate points
if(*i != c)
{
}
}
//initialprocess = timer();
-
+
if(f.size()<=6)
return;
-
+
//get curvature information
//timer.reset();
-
+
{
int i,i0,i1;
synfig::Vector v1,v2;
-
+
cvt.resize(f.size());
-
+
cvt.front() = 1;
cvt.back() = 1;
-
+
for(i = 1; i < (int)f.size()-1; ++i)
{
i0 = std::max(0,i - 2);
i1 = std::min((int)(f.size()-1),i + 2);
-
+
v1 = f[i] - f[i0];
v2 = f[i1] - f[i];
-
+
cvt[i] = (v1*v2)/(v1.mag()*v2.mag());
}
}
-
+
//curveval = timer();
//synfig::info("calculated curvature");
-
+
//find corner points and interpolate inside those
//timer.reset();
- {
+ {
//break at sharp derivative points
//TODO tolerance should be set based upon digitization resolution (length dependent index selection)
Real tol = 0; //break tolerance, for the cosine of the change in angle (really high curvature or something)
Real fixdistsq = 4*width*width; //the distance to ignore breaks at the end points (for fixing stuff)
unsigned int i = 0;
-
+
int maxi = -1, last=0;
Real minc = 1;
-
+
brk.push_back(0);
-
+
for(i = 1; i < cvt.size()-1; ++i)
- {
+ {
//insert if too sharp (we need to break the tangents to insert onto the break list)
-
+
if(cvt[i] < tol)
{
if(cvt[i] < minc)
{
if(maxi >= last + 8)
{
- //synfig::info("break: %d-%d",maxi+1,cvt.size());
+ //synfig::info("break: %d-%d",maxi+1,cvt.size());
brk.push_back(maxi);
last = maxi;
}
minc = 1;
}
}
-
+
brk.push_back(i);
-
- //postprocess for breaks too close to eachother
+
+ //postprocess for breaks too close to each other
Real d = 0;
Point p = f[brk.front()];
-
+
//first set
for(i = 1; i < brk.size()-1; ++i) //do not want to include end point...
{
d = (f[brk[i]] - p).mag_squared();
- if(d > fixdistsq) break; //don't want to group breaks if we ever get over the dist...
+ if(d > fixdistsq) break; //don't want to group breaks if we ever get over the dist...
}
//want to erase all points before...
if(i != 1)
- brk.erase(brk.begin(),brk.begin()+i-1);
-
+ brk.erase(brk.begin(),brk.begin()+i-1);
+
//end set
p = f[brk.back()];
for(i = brk.size()-2; i > 0; --i) //start at one in from the end
}
//breakeval = timer();
//synfig::info("found break points: %d",brk.size());
-
+
//get the distance calculation of the entire curve (for tangent scaling)
//timer.reset();
{
synfig::Point p1,p2;
-
+
p1=p2=f[0];
-
+
di.resize(f.size()); d_i.resize(f.size());
Real d = 0;
for(unsigned int i = 0; i < f.size();)
{
d += (d_i[i] = (p2-p1).mag());
di[i] = d;
-
+
p1=p2;
p2=f[++i];
}
}
//disteval = timer();
//synfig::info("calculated distance");
-
+
//now break at every point - calculate new derivatives each time
-
+
//TODO
//must be sure that the break points are 3 or more apart
//then must also store the breaks which are not smooth, etc.
//and figure out tangents between there
-
+
//for each pair of break points (as long as they are far enough apart) recursively subdivide stuff
//ignore the detected intermediate points
{
unsigned int i0=0,i3=0,is=0;
int i=0,j=0;
-
+
bool done = false;
-
+
Real errortol = smoothness*pixelwidth; //???? what the hell should this value be
-
+
BLinePoint a;
synfig::Vector v;
-
+
//intemp = f; //don't want to smooth out the corners
-
+
bool breaktan = false, setwidth;
a.set_split_tangent_flag(false);
//a.set_width(width);
a.set_width(1.0f);
-
+
setwidth = (f.size() == f_w.size());
-
+
for(j = 0; j < (int)brk.size() - 1; ++j)
{
//for b[j] to b[j+1] subdivide and stuff
i0 = brk[j];
i3 = brk[j+1];
-
+
unsigned int size = i3-i0+1; //must include the end points
-
+
//new derivatives
//timer.reset();
ftemp.assign(f.begin()+i0, f.begin()+i3+1);
for(i=0;i<20;++i)
gaussian_blur_3(ftemp.begin(),ftemp.end(),false);
-
+
df.resize(size);
GetFirstDerivatives(ftemp,0,size,(char*)&df[0],sizeof(df[0]));
- //GetSimpleDerivatives(ftemp,0,size,df,0,di);
- //< don't have to worry about indexing stuff as it is all being taken car of right now
+ //GetSimpleDerivatives(ftemp,0,size,df,0,di);
+ //< don't have to worry about indexing stuff as it is all being taken care of right now
//preproceval += timer();
//numpre++;
-
- work.resize(size*2-1); //guarantee that all points will be tesselated correctly (one point inbetween every 2 adjacent points)
-
+
+ work.resize(size*2-1); //guarantee that all points will be tessellated correctly (one point in between every 2 adjacent points)
+
//if size of work is size*2-1, the step size should be 1/(size*2 - 2)
//Real step = 1/(Real)(size*2 - 1);
-
+
//start off with break points as indices
curind.clear();
curind.push_back(cpindex(i0,di[i3]-di[i0],0)); //0 error because no curve on the left
curind.push_back(cpindex(i3,di[i3]-di[i0],-1)); //error needs to be reevaluated
done = false; //we want to loop
-
+
unsigned int dcount = 0;
-
- //while there are still enough points between us, and the error is too high subdivide (and invalidate neighbors that share tangents)
+
+ //while there are still enough points between us, and the error is too high subdivide (and invalidate neighbors that share tangents)
while(!done)
- {
- //tesselate all curves with invalid error values
+ {
+ //tessellate all curves with invalid error values
work[0] = f[i0];
-
+
//timer.reset();
- /*numtess += */tesselate_curves(curind,f,df,work);
+ /*numtess += */tessellate_curves(curind,f,df,work);
//tesseval += timer();
-
+
//now get all error values
//timer.reset();
for(i = 1; i < (int)curind.size(); ++i)
{
- if(curind[i].error < 0) //must have been retesselated, so now recalculate error value
+ if(curind[i].error < 0) //must have been retessellated, so now recalculate error value
{
//evaluate error from points (starting at current index)
int size = curind[i].curind - curind[i-1].curind + 1;
curind[i].error = CurveError(&f[curind[i-1].curind], size,
work,(curind[i-1].curind - i0)*2,(curind[i].curind - i0)*2+1);
-
+
/*if(curind[i].error > 1.0e5)
{
synfig::info("Holy crap %d-%d error %f",curind[i-1].curind,curind[i].curind,curind[i].error);
curind[i].error = -1;
- numtess += tesselate_curves(curind,f,df,work);
+ numtess += tessellate_curves(curind,f,df,work);
curind[i].error = CurveError(&f[curind[i-1].curind], size,
work,0,work.size());//(curind[i-1].curind - i0)*2,(curind[i].curind - i0)*2+1);
}*/
}
}
//erroreval += timer();
-
+
//assume we're done
done = true;
-
+
//check each error to see if it's too big, if so, then subdivide etc.
int indsize = (int)curind.size();
Real maxrelerror = 0;
int maxi = -1;//, numpoints;
-
+
//timer.reset();
//get the maximum error and split there
for(i = 1; i < indsize; ++i)
{
//numpoints = curind[i].curind - curind[i-1].curind + 1;
-
+
if(curind[i].error > maxrelerror && curind[i].curind - curind[i-1].curind > 2) //only accept if it's valid
{
maxrelerror = curind[i].error;
maxi = i;
}
}
-
+
//split if error is too great
if(maxrelerror > errortol)
{
unsigned int ibase = curind[maxi-1].curind, itop = curind[maxi].curind,
ibreak = (ibase + itop)/2;
Real scale, scale2;
-
+
assert(ibreak < f.size());
-
+
//synfig::info("Split %d -%d- %d, error: %f", ibase,ibreak,itop,maxrelerror);
-
+
if(ibase != itop)
{
//invalidate current error of the changed tangents and add an extra segment
curind[maxi].error = -1;
curind[maxi-1].error = -1;
if(maxi+1 < indsize) curind[maxi+1].error = -1; //if there is a curve segment beyond this it will be effected as well
-
+
scale = di[itop] - di[ibreak];
scale2 = maxi+1 < indsize ? di[curind[maxi+1].curind] - di[itop] : scale; //to the right valid?
curind[maxi].tangentscale = std::min(scale, scale2);
-
+
scale = di[ibreak] - di[ibase];
scale2 = maxi >= 2 ? di[ibase] - di[curind[maxi-2].curind] : scale; // to the left valid -2 ?
curind[maxi-1].tangentscale = std::min(scale, scale2);
-
+
scale = std::min(di[ibreak] - di[ibase], di[itop] - di[ibreak]);
-
+
curind.insert(curind.begin()+maxi,cpindex(ibreak, scale, -1));
//curind.push_back(cpindex(ibreak, scale, -1));
//std::sort(curind.begin(), curind.end());
-
+
done = false;
//numsplit++;
}
}
//spliteval += timer();
-
+
dcount++;
}
-
- //insert the last point too (just set tangent for now
+
+ //insert the last point too (just set tangent for now
is = curind[0].curind;
-
- //first point inherits current tangent status
+
+ //first point inherits current tangent status
v = df[is - i0];
if(v.mag_squared() > EPSILON)
v *= (curind[0].tangentscale/v.mag());
-
+
if(!breaktan)
a.set_tangent(v);
else a.set_tangent2(v);
-
+
a.set_vertex(f[is]);
if(setwidth)a.set_width(f_w[is]);
-
+
out.push_back(a);
a.set_split_tangent_flag(false); //won't need to break anymore
breaktan = false;
-
+
for(i = 1; i < (int)curind.size()-1; ++i)
{
is = curind[i].curind;
-
+
//first point inherits current tangent status
v = df[is-i0];
if(v.mag_squared() > EPSILON)
v *= (curind[i].tangentscale/v.mag());
-
+
a.set_tangent(v); // always inside, so guaranteed to be smooth
a.set_vertex(f[is]);
if(setwidth)a.set_width(f_w[is]);
-
+
out.push_back(a);
}
-
+
//set the last point's data
is = curind.back().curind; //should already be this
-
+
v = df[is-i0];
if(v.mag_squared() > EPSILON)
v *= (curind.back().tangentscale/v.mag());
-
+
a.set_tangent1(v);
a.set_split_tangent_flag(true);
breaktan = true;
-
+
//will get the vertex and tangent 2 from next round
}
-
+
a.set_vertex(f[i3]);
a.set_split_tangent_flag(false);
if(setwidth)
a.set_width(f_w[i3]);
out.push_back(a);
-
+
/*etl::clock::value_type totaltime = total(),
misctime = totaltime - initialprocess - curveval - breakeval - disteval
- preproceval - tesseval - erroreval - spliteval;
-
+
synfig::info(
"Curve Convert Profile:\n"
"\tInitial Preprocess: %f\n"
"\tDistance Calculation: %f\n"
" Algorithm: (numtimes,totaltime)\n"
"\tPreprocess step: (%d,%f)\n"
- "\tTesselation step: (%d,%f)\n"
+ "\tTessellation step: (%d,%f)\n"
"\tError step: (%d,%f)\n"
"\tSplit step: (%d,%f)\n"
" Num Input: %d, Num Output: %d\n"
numpre,preproceval,numtess,tesseval,numerror,erroreval,numsplit,spliteval,
in.size(),out.size(),
totaltime,misctime);*/
-
+
return;
}
}
{
std::list<synfig::BLinePoint>::iterator i = bline.begin(),
end = bline.end();
-
+
for(i = bline.begin(); i != end; ++i)
{
if(i->get_width() < min_pressure)