synfig-studio/trunk/src/gtkmm/state_draw.cpp

   1 /* === S Y N F I G ========================================================= */
   2 /*!     \file state_draw.cpp
   3 **      \brief Template File
   4 **
   5 **      $Id$
   6 **
   7 **      \legal
   8 **      Copyright (c) 2002-2005 Robert B. Quattlebaum Jr., Adrian Bentley
   9 **      Copyright (c) 2007 Chris Moore
  10 **
  11 **      This package is free software; you can redistribute it and/or
  12 **      modify it under the terms of the GNU General Public License as
  13 **      published by the Free Software Foundation; either version 2 of
  14 **      the License, or (at your option) any later version.
  15 **
  16 **      This package is distributed in the hope that it will be useful,
  17 **      but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 **      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  19 **      General Public License for more details.
  20 **      \endlegal
  21 */
  22 /* ========================================================================= */
  23
  24 /* === H E A D E R S ======================================================= */
  25
  26 #ifdef USING_PCH
  27 #       include "pch.h"
  28 #else
  29 #ifdef HAVE_CONFIG_H
  30 #       include <config.h>
  31 #endif
  32
  33 #include <gtkmm/dialog.h>
  34 #include <gtkmm/entry.h>
  35
  36 #include <synfig/valuenode_dynamiclist.h>
  37
  38 #include "state_draw.h"
  39 #include "state_stroke.h"
  40 #include "canvasview.h"
  41 #include "workarea.h"
  42 #include "app.h"
  43 #include <synfig/valuenode_bline.h>
  44 #include <synfig/valuenode_composite.h>
  45 #include <ETL/hermite>
  46 #include <ETL/calculus>
  47 #include <utility>
  48 #include "event_mouse.h"
  49 #include "event_layerclick.h"
  50 #include "toolbox.h"
  51
  52 #include <synfigapp/blineconvert.h>
  53 #include <synfigapp/main.h>
  54
  55 #include <ETL/gaussian>
  56 #include "dialog_tooloptions.h"
  57
  58 #include <gtkmm/table.h>
  59 #include <gtkmm/label.h>
  60 #include <gtkmm/button.h>
  61 #include <gtkmm/checkbutton.h>
  62 #include <gtkmm/scale.h>
  63 #include <sigc++/connection.h>
  64
  65 #endif
  66
  67 /* === U S I N G =========================================================== */
  68
  69 using namespace std;
  70 using namespace etl;
  71 using namespace synfig;
  72 using namespace studio;
  73
  74 /* === M A C R O S ========================================================= */
  75
  76 /* === G L O B A L S ======================================================= */
  77
  78 StateDraw studio::state_draw;
  79
  80 /* === C L A S S E S & S T R U C T S ======================================= */
  81
  82 class studio::StateDraw_Context : public sigc::trackable
  83 {
  84         typedef etl::smart_ptr<std::list<synfig::Point> > StrokeData;
  85         typedef etl::smart_ptr<std::list<synfig::Real> > WidthData;
  86
  87         typedef list< pair<StrokeData,WidthData> > StrokeQueue;
  88
  89         StrokeQueue stroke_queue;
  90
  91
  92         etl::handle<CanvasView> canvas_view_;
  93         CanvasView::IsWorking is_working;
  94
  95         bool prev_table_status;
  96         bool loop_;
  97         bool prev_workarea_layer_status_;
  98
  99         int nested;
 100         SigC::Connection process_queue_connection;
 101
 102         ValueNode_BLine::Handle last_stroke;
 103
 104         Gtk::Menu menu;
 105
 106         //Duckmatic::Push duckmatic_push;
 107
 108         std::list< etl::smart_ptr<std::list<synfig::Point> > > stroke_list;
 109
 110         void refresh_ducks();
 111
 112         Duckmatic::Type old_duckmask;
 113
 114         void fill_last_stroke();
 115
 116         Smach::event_result new_bline(std::list<synfig::BLinePoint> bline,bool loop_bline_flag,float radius);
 117
 118         Smach::event_result new_region(std::list<synfig::BLinePoint> bline,synfig::Real radius);
 119
 120         Smach::event_result extend_bline_from_begin(ValueNode_BLine::Handle value_node,std::list<synfig::BLinePoint> bline,bool complete_loop);
 121         Smach::event_result extend_bline_from_end(ValueNode_BLine::Handle value_node,std::list<synfig::BLinePoint> bline,bool complete_loop);
 122         void reverse_bline(std::list<synfig::BLinePoint> &bline);
 123
 124         synfigapp::Settings& settings;
 125
 126         Gtk::Table options_table;
 127         Gtk::CheckButton checkbutton_pressure_width;
 128         Gtk::CheckButton checkbutton_round_ends;
 129         Gtk::CheckButton checkbutton_auto_loop;   // whether to loop new strokes which start and end in the same place
 130         Gtk::CheckButton checkbutton_auto_extend; // whether to extend existing lines
 131         Gtk::CheckButton checkbutton_auto_link;   // whether to link new ducks to existing ducks
 132         Gtk::CheckButton checkbutton_region_only;
 133         Gtk::Button button_fill_last_stroke;
 134
 135         //pressure spinner and such
 136         Gtk::Adjustment  adj_min_pressure;
 137         Gtk::SpinButton  spin_min_pressure;
 138         Gtk::CheckButton check_min_pressure;
 139
 140         Gtk::Adjustment  adj_feather;
 141         Gtk::SpinButton  spin_feather;
 142
 143         Gtk::Adjustment  adj_globalthres;
 144         Gtk::SpinButton  spin_globalthres;
 145
 146         Gtk::Adjustment  adj_localthres;
 147         Gtk::CheckButton check_localerror;
 148         void UpdateErrorBox();  //switches the stuff if need be :)
 149
 150         //Added by Adrian - data drive HOOOOO
 151         synfigapp::BLineConverter blineconv;
 152
 153 public:
 154         bool get_pressure_width_flag()const { return checkbutton_pressure_width.get_active(); }
 155         void set_pressure_width_flag(bool x) { return checkbutton_pressure_width.set_active(x); }
 156
 157         bool get_auto_loop_flag()const { return checkbutton_auto_loop.get_active(); }
 158         void set_auto_loop_flag(bool x) { return checkbutton_auto_loop.set_active(x); }
 159
 160         bool get_auto_extend_flag()const { return checkbutton_auto_extend.get_active(); }
 161         void set_auto_extend_flag(bool x) { return checkbutton_auto_extend.set_active(x); }
 162
 163         bool get_auto_link_flag()const { return checkbutton_auto_link.get_active(); }
 164         void set_auto_link_flag(bool x) { return checkbutton_auto_link.set_active(x); }
 165
 166         bool get_region_only_flag()const { return checkbutton_region_only.get_active(); }
 167         void set_region_only_flag(bool x) { return checkbutton_region_only.set_active(x); }
 168
 169         Real get_min_pressure() const { return adj_min_pressure.get_value(); }
 170         void set_min_pressure(Real x) { return adj_min_pressure.set_value(x); }
 171
 172         Real get_feather() const { return adj_feather.get_value(); }
 173         void set_feather(Real x) { return adj_feather.set_value(x); }
 174
 175         Real get_gthres() const { return adj_globalthres.get_value(); }
 176         void set_gthres(Real x) { return adj_globalthres.set_value(x); }
 177
 178         Real get_lthres() const { return adj_localthres.get_value(); }
 179         void set_lthres(Real x) { return adj_localthres.set_value(x); }
 180
 181         bool get_local_error_flag() const { return check_localerror.get_active(); }
 182         void set_local_error_flag(bool x) { check_localerror.set_active(x); }
 183
 184         bool get_min_pressure_flag()const { return check_min_pressure.get_active(); }
 185         void set_min_pressure_flag(bool x) { check_min_pressure.set_active(x); }
 186
 187         void load_settings();
 188         void save_settings();
 189
 190         Smach::event_result event_stop_handler(const Smach::event& x);
 191
 192         Smach::event_result event_refresh_handler(const Smach::event& x);
 193
 194         Smach::event_result event_mouse_down_handler(const Smach::event& x);
 195
 196         Smach::event_result event_stroke(const Smach::event& x);
 197         Smach::event_result event_refresh_tool_options(const Smach::event& x);
 198         void refresh_tool_options();
 199
 200         Smach::event_result process_stroke(StrokeData stroke_data, WidthData width_data, bool region_flag=false);
 201
 202         bool process_queue();
 203
 204
 205         StateDraw_Context(CanvasView* canvas_view);
 206
 207         ~StateDraw_Context();
 208
 209         const etl::handle<CanvasView>& get_canvas_view()const{return canvas_view_;}
 210         etl::handle<synfigapp::CanvasInterface> get_canvas_interface()const{return canvas_view_->canvas_interface();}
 211         synfig::Time get_time()const { return get_canvas_interface()->get_time(); }
 212         synfig::Canvas::Handle get_canvas()const{return canvas_view_->get_canvas();}
 213         WorkArea * get_work_area()const{return canvas_view_->get_work_area();}
 214
 215         //void on_user_click(synfig::Point point);
 216
 217 //      bool run();
 218 };      // END of class StateDraw_Context
 219
 220
 221 /* === M E T H O D S ======================================================= */
 222
 223 StateDraw::StateDraw():
 224         Smach::state<StateDraw_Context>("draw")
 225 {
 226         insert(event_def(EVENT_STOP,&StateDraw_Context::event_stop_handler));
 227         insert(event_def(EVENT_REFRESH,&StateDraw_Context::event_refresh_handler));
 228         insert(event_def(EVENT_WORKAREA_MOUSE_BUTTON_DOWN,&StateDraw_Context::event_mouse_down_handler));
 229         insert(event_def(EVENT_WORKAREA_STROKE,&StateDraw_Context::event_stroke));
 230         insert(event_def(EVENT_REFRESH_TOOL_OPTIONS,&StateDraw_Context::event_refresh_tool_options));
 231 }
 232
 233 StateDraw::~StateDraw()
 234 {
 235 }
 236
 237
 238 void
 239 StateDraw_Context::load_settings()
 240 {
 241         String value;
 242
 243         if(settings.get_value("draw.pressure_width",value) && value=="0")
 244                 set_pressure_width_flag(false);
 245         else
 246                 set_pressure_width_flag(true);
 247
 248         if(settings.get_value("draw.auto_loop",value) && value=="0")
 249                 set_auto_loop_flag(false);
 250         else
 251                 set_auto_loop_flag(true);
 252
 253         if(settings.get_value("draw.auto_extend",value) && value=="0")
 254                 set_auto_extend_flag(false);
 255         else
 256                 set_auto_extend_flag(true);
 257
 258         if(settings.get_value("draw.auto_link",value) && value=="0")
 259                 set_auto_link_flag(false);
 260         else
 261                 set_auto_link_flag(true);
 262
 263         if(settings.get_value("draw.region_only",value) && value=="1")
 264                 set_region_only_flag(true);
 265         else
 266                 set_region_only_flag(false);
 267
 268         if(settings.get_value("draw.min_pressure_on",value) && value=="0")
 269                 set_min_pressure_flag(false);
 270         else
 271                 set_min_pressure_flag(true);
 272
 273         if(settings.get_value("draw.min_pressure",value))
 274         {
 275                 Real n = atof(value.c_str());
 276                 set_min_pressure(n);
 277         }else
 278                 set_min_pressure(0);
 279
 280         if(settings.get_value("draw.feather",value))
 281         {
 282                 Real n = atof(value.c_str());
 283                 set_feather(n);
 284         }else
 285                 set_feather(0);
 286
 287         if(settings.get_value("draw.gthreshold",value))
 288         {
 289                 Real n = atof(value.c_str());
 290                 set_gthres(n);
 291         }
 292
 293         if(settings.get_value("draw.lthreshold",value))
 294         {
 295                 Real n = atof(value.c_str());
 296                 set_lthres(n);
 297         }
 298
 299         if(settings.get_value("draw.localize",value) && value == "1")
 300                 set_local_error_flag(true);
 301         else
 302                 set_local_error_flag(false);
 303 }
 304
 305 void
 306 StateDraw_Context::save_settings()
 307 {
 308         settings.set_value("draw.pressure_width",get_pressure_width_flag()?"1":"0");
 309         settings.set_value("draw.auto_loop",get_auto_loop_flag()?"1":"0");
 310         settings.set_value("draw.auto_extend",get_auto_extend_flag()?"1":"0");
 311         settings.set_value("draw.auto_link",get_auto_link_flag()?"1":"0");
 312         settings.set_value("draw.region_only",get_region_only_flag()?"1":"0");
 313         settings.set_value("draw.min_pressure",strprintf("%f",get_min_pressure()));
 314         settings.set_value("draw.feather",strprintf("%f",get_feather()));
 315         settings.set_value("draw.min_pressure_on",get_min_pressure_flag()?"1":"0");
 316         settings.set_value("draw.gthreshold",strprintf("%f",get_gthres()));
 317         settings.set_value("draw.lthreshold",strprintf("%f",get_lthres()));
 318         settings.set_value("draw.localize",get_local_error_flag()?"1":"0");
 319 }
 320
 321 StateDraw_Context::StateDraw_Context(CanvasView* canvas_view):
 322         canvas_view_(canvas_view),
 323         is_working(*canvas_view),
 324         loop_(false),
 325         prev_workarea_layer_status_(get_work_area()->allow_layer_clicks),
 326         settings(synfigapp::Main::get_selected_input_device()->settings()),
 327         checkbutton_pressure_width(_("Pressure Width")),
 328         checkbutton_auto_loop(_("Auto Loop")),
 329         checkbutton_auto_extend(_("Auto Extend")),
 330         checkbutton_auto_link(_("Auto Link")),
 331         checkbutton_region_only(_("Create Region Only")),
 332         button_fill_last_stroke(_("Fill Last Stroke")),
 333         adj_min_pressure(0,0,1,0.01,0.1),
 334         spin_min_pressure(adj_min_pressure,0.1,3),
 335         check_min_pressure(_("Min Pressure")),
 336         adj_feather(0,0,10000,0.01,0.1),
 337         spin_feather(adj_feather,0.01,4),
 338         adj_globalthres(.70f,0.01,10000,0.01,0.1),
 339         spin_globalthres(adj_globalthres,0.01,3),
 340         adj_localthres(20,1,100000,0.1,1),
 341         check_localerror(_("LocalError"))
 342
 343 {
 344         synfig::info("STATE SKETCH: entering state");
 345
 346         nested=0;
 347         load_settings();
 348
 349         UpdateErrorBox();
 350
 351         //options_table.attach(*manage(new Gtk::Label(_("Draw Tool"))), 0, 2, 0, 1, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 352         options_table.attach(checkbutton_pressure_width, 0, 2, 1, 2, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 353         options_table.attach(checkbutton_auto_loop, 0, 2, 2, 3, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 354         options_table.attach(checkbutton_auto_extend, 0, 2, 3, 4, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 355         options_table.attach(checkbutton_auto_link, 0, 2, 4, 5, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 356         options_table.attach(checkbutton_region_only, 0, 2, 5, 6, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 357
 358         options_table.attach(check_min_pressure, 0, 2, 6, 7, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 359         options_table.attach(spin_min_pressure, 0, 2, 7, 8, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 360
 361         options_table.attach(*manage(new Gtk::Label(_("Feather"))), 0, 1, 8, 9, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 362         options_table.attach(spin_feather, 1, 2, 8, 9, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 363
 364         options_table.attach(check_localerror, 0, 2, 9, 10, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 365         options_table.attach(*manage(new Gtk::Label(_("Smooth"))), 0, 1, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 366         options_table.attach(spin_globalthres, 1, 2, 10, 11, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 367
 368         //options_table.attach(button_fill_last_stroke, 0, 2, 11, 12, Gtk::EXPAND|Gtk::FILL, Gtk::EXPAND|Gtk::FILL, 0, 0);
 369
 370         button_fill_last_stroke.signal_pressed().connect(sigc::mem_fun(*this,&StateDraw_Context::fill_last_stroke));
 371         check_localerror.signal_toggled().connect(sigc::mem_fun(*this,&StateDraw_Context::UpdateErrorBox));
 372
 373         options_table.show_all();
 374         refresh_tool_options();
 375         //App::dialog_tool_options->set_widget(options_table);
 376         App::dialog_tool_options->present();
 377
 378
 379         old_duckmask=get_work_area()->get_type_mask();
 380         get_work_area()->set_type_mask(Duck::TYPE_ALL-Duck::TYPE_TANGENT-Duck::TYPE_WIDTH);
 381
 382         // Turn off layer clicking
 383         get_work_area()->allow_layer_clicks=false;
 384
 385         // Turn off duck clicking
 386         get_work_area()->allow_duck_clicks=false;
 387
 388         // clear out the ducks
 389         //get_work_area()->clear_ducks();
 390
 391         // Refresh the work area
 392         //get_work_area()->queue_draw();
 393
 394         // Hide the tables if they are showing
 395         prev_table_status=get_canvas_view()->tables_are_visible();
 396         //if(prev_table_status)get_canvas_view()->hide_tables();
 397
 398         // Disable the time bar
 399         get_canvas_view()->set_sensitive_timebar(false);
 400
 401         // Connect a signal
 402         //get_work_area()->signal_user_click().connect(sigc::mem_fun(*this,&studio::StateDraw_Context::on_user_click));
 403
 404         get_canvas_view()->work_area->set_cursor(Gdk::PENCIL);
 405
 406         App::toolbox->refresh();
 407
 408         refresh_ducks();
 409 }
 410
 411
 412 void StateDraw_Context::UpdateErrorBox()
 413 {
 414         if(get_local_error_flag())
 415         {
 416                 spin_globalthres.set_adjustment(adj_localthres);
 417                 spin_globalthres.set_value(adj_localthres.get_value());
 418                 spin_globalthres.set_increments(0.1,1);
 419         }else
 420         {
 421                 spin_globalthres.set_adjustment(adj_globalthres);
 422                 spin_globalthres.set_value(adj_globalthres.get_value());
 423                 spin_globalthres.set_increments(0.01,.1);
 424         }
 425
 426         spin_globalthres.update();
 427 }
 428
 429 void
 430 StateDraw_Context::refresh_tool_options()
 431 {
 432         App::dialog_tool_options->clear();
 433         App::dialog_tool_options->set_widget(options_table);
 434         App::dialog_tool_options->set_local_name(_("Draw Tool"));
 435         App::dialog_tool_options->set_name("draw");
 436
 437         App::dialog_tool_options->add_button(
 438                 Gtk::StockID("synfig-fill"),
 439                 _("Fill Last Stroke")
 440         )->signal_clicked().connect(
 441                 sigc::mem_fun(
 442                         *this,
 443                         &StateDraw_Context::fill_last_stroke
 444                 )
 445         );
 446
 447 }
 448
 449 Smach::event_result
 450 StateDraw_Context::event_refresh_tool_options(const Smach::event& x)
 451 {
 452         refresh_tool_options();
 453         return Smach::RESULT_ACCEPT;
 454 }
 455
 456 StateDraw_Context::~StateDraw_Context()
 457 {
 458         save_settings();
 459
 460         App::dialog_tool_options->clear();
 461
 462         get_work_area()->set_type_mask(old_duckmask);
 463
 464         get_canvas_view()->work_area->reset_cursor();
 465
 466         // Restore layer clicking
 467         get_work_area()->allow_layer_clicks=prev_workarea_layer_status_;
 468
 469         // Restore duck clicking
 470         get_work_area()->allow_duck_clicks=true;
 471
 472         // Enable the time bar
 473         get_canvas_view()->set_sensitive_timebar(true);
 474
 475         // Bring back the tables if they were out before
 476         if(prev_table_status)get_canvas_view()->show_tables();
 477
 478         // Refresh the work area
 479         get_work_area()->queue_draw();
 480
 481         App::toolbox->refresh();
 482 }
 483
 484 Smach::event_result
 485 StateDraw_Context::event_stop_handler(const Smach::event& x)
 486 {
 487         throw Smach::egress_exception();
 488 }
 489
 490 Smach::event_result
 491 StateDraw_Context::event_refresh_handler(const Smach::event& x)
 492 {
 493         refresh_ducks();
 494         return Smach::RESULT_ACCEPT;
 495 }
 496
 497 Smach::event_result
 498 StateDraw_Context::event_mouse_down_handler(const Smach::event& x)
 499 {
 500         const EventMouse& event(*reinterpret_cast<const EventMouse*>(&x));
 501         switch(event.button)
 502         {
 503         case BUTTON_LEFT:
 504                 {
 505                         // Enter the stroke state to get the stroke
 506                         get_canvas_view()->get_smach().push_state(&state_stroke);
 507                         return Smach::RESULT_ACCEPT;
 508                 }
 509
 510         case BUTTON_RIGHT: // Intercept the right-button click to short-circut the pop-up menu
 511                 return Smach::RESULT_ACCEPT;
 512
 513         default:
 514                 return Smach::RESULT_OK;
 515         }
 516 }
 517
 518 #define SIMILAR_TANGENT_THRESHOLD       (0.2)
 519
 520 struct debugclass
 521 {
 522         synfig::String x;
 523         debugclass(const synfig::String &x):x(x)
 524         {
 525 //              synfig::warning(">>>>>>>>>>>>>>>>>>> "+x);
 526         }
 527         ~debugclass()
 528         {
 529 //              synfig::warning("<<<<<<<<<<<<<<<<<<< "+x);
 530         }
 531 };
 532
 533 struct DepthCounter
 534 {
 535         int &i;
 536         DepthCounter(int &i):i(i) { i++; }
 537         ~DepthCounter() { i--; }
 538 };
 539
 540 Smach::event_result
 541 StateDraw_Context::event_stroke(const Smach::event& x)
 542 {
 543 //      debugclass debugger("StateDraw_Context::event_stroke(const Smach::event& x)");
 544
 545         const EventStroke& event(*reinterpret_cast<const EventStroke*>(&x));
 546
 547         assert(event.stroke_data);
 548
 549         get_work_area()->add_stroke(event.stroke_data,synfigapp::Main::get_foreground_color());
 550
 551         if(nested==0)
 552         {
 553                 DirtyTrap dirty_trap(get_work_area());
 554                 Smach::event_result result;
 555                 result=process_stroke(event.stroke_data,event.width_data,event.modifier&Gdk::CONTROL_MASK || event.modifier&Gdk::BUTTON2_MASK);
 556                 process_queue();
 557                 return result;
 558         }
 559
 560         stroke_queue.push_back(pair<StrokeData,WidthData>(event.stroke_data,event.width_data));
 561
 562         return Smach::RESULT_ACCEPT;
 563 }
 564
 565 bool
 566 StateDraw_Context::process_queue()
 567 {
 568 //      debugclass debugger("StateDraw_Context::process_queue()");
 569         if(nested)
 570                 return true;
 571         DepthCounter depth_counter(nested);
 572         while(!stroke_queue.empty())
 573         {
 574                 pair<StrokeData,WidthData> front(stroke_queue.front());
 575                 process_stroke(front.first,front.second);
 576                 stroke_queue.pop_front();
 577         }
 578         return false;
 579 }
 580
 581 Smach::event_result
 582 StateDraw_Context::process_stroke(StrokeData stroke_data, WidthData width_data, bool region_flag)
 583 {
 584 //      debugclass debugger("StateDraw_Context::process_stroke");
 585         DepthCounter depth_counter(nested);
 586
 587         const float radius(synfigapp::Main::get_bline_width().units(get_canvas()->rend_desc())+(abs(get_work_area()->get_pw())+abs(get_work_area()->get_ph()))*5);
 588
 589
 590         // If we aren't using pressure width,
 591         // then set all the width to 1
 592         if(!get_pressure_width_flag())
 593         {
 594                 std::list<synfig::Real>::iterator iter;
 595                 for(iter=width_data->begin();iter!=width_data->end();++iter)
 596                 {
 597                         *iter=1.0;
 598                 }
 599         }
 600
 601         //get_work_area()->add_stroke(event.stroke_data,synfigapp::Main::get_foreground_color());
 602         //stroke_list.push_back(event.stroke_data);
 603         //refresh_ducks();
 604
 605         std::list<synfig::BLinePoint> bline;
 606         bool loop_bline_flag(false);
 607
 608         //Changed by Adrian - use resident class :)
 609         //synfigapp::convert_stroke_to_bline(bline, *event.stroke_data,*event.width_data, synfigapp::Main::get_bline_width());
 610         blineconv.width = synfigapp::Main::get_bline_width().units(get_canvas()->rend_desc());
 611
 612         if(get_local_error_flag())
 613         {
 614                 float pw = get_work_area()->get_pw();
 615                 float ph = get_work_area()->get_ph();
 616
 617                 blineconv.pixelwidth = sqrt(pw*pw+ph*ph);
 618                 blineconv.smoothness = get_lthres();
 619         }else
 620         {
 621                 blineconv.pixelwidth = 1;
 622                 blineconv.smoothness = get_gthres();
 623         }
 624
 625         blineconv(bline,*stroke_data,*width_data);
 626
 627         //Postprocess to require minimum pressure
 628         if(get_min_pressure_flag())
 629         {
 630                 synfigapp::BLineConverter::EnforceMinWidth(bline,get_min_pressure());
 631         }
 632
 633         // If the start and end points are similar, then make them the same point
 634         if(get_auto_loop_flag() &&
 635            bline.size()>2&&(bline.front().get_vertex()-bline.back().get_vertex()).mag()<=radius)
 636         {
 637                 loop_bline_flag=true;
 638                 Vector tangent;
 639                 Real width(0);
 640
 641                 while(bline.size()>2&&(bline.front().get_vertex()-bline.back().get_vertex()).mag()<=radius)
 642                 {
 643                         tangent=bline.back().get_tangent1();
 644                         width=bline.back().get_width();
 645                         bline.pop_back();
 646                 }
 647
 648                 if(abs(bline.front().get_tangent1().norm()*tangent.norm().perp())>SIMILAR_TANGENT_THRESHOLD)
 649                 {
 650                         // If the tangents are not similar, then
 651                         // split the tangents
 652                         bline.front().set_split_tangent_flag(true);
 653                         bline.front().set_tangent1(tangent);
 654                 }
 655                 else
 656                 {
 657                         // If the tangents are similar, then set the tangent
 658                         // to the average of the two
 659                         bline.front().set_tangent((tangent+bline.front().get_tangent1())*0.5f);
 660                 }
 661
 662                 // Add the widths of the two points
 663                 {
 664                         Real tmp_width(bline.front().get_width()+width);
 665                         tmp_width=tmp_width<=1?tmp_width:1;
 666                         bline.front().set_width(tmp_width);
 667                 }
 668         }
 669
 670         // If the bline only has once blinepoint, then there is nothing to do.
 671         if(bline.size()<=1)
 672                 return Smach::RESULT_OK;
 673
 674         if(region_flag)
 675                 return new_region(bline,radius);
 676
 677         return new_bline(bline,loop_bline_flag,radius);
 678 }
 679
 680 Smach::event_result
 681 StateDraw_Context::new_bline(std::list<synfig::BLinePoint> bline,bool loop_bline_flag,float radius)
 682 {
 683         // Create the action group
 684         synfigapp::Action::PassiveGrouper group(get_canvas_interface()->get_instance().get(),_("Sketch BLine"));
 685
 686         bool shift_offset = false;
 687         Vector shift_offset_vector;
 688         bool join_start_no_extend=false,join_finish_no_extend=false;
 689         synfigapp::ValueDesc start_duck_value_desc,finish_duck_value_desc;
 690         bool extend_start=false,extend_finish=false,complete_loop=false;
 691         bool extend_start_join_same=false,extend_start_join_different=false;
 692         bool extend_finish_join_same=false,extend_finish_join_different=false;
 693         int start_duck_index,finish_duck_index;
 694         ValueNode_BLine::Handle start_duck_value_node_bline=NULL,finish_duck_value_node_bline=NULL;
 695
 696         // Find any ducks at the start or end that we might attach to
 697         // (this used to only run if we aren't a loop - ie. !loop_bline_flag
 698         // but having loops auto-connect can be useful as well)
 699         if(get_auto_extend_flag() || get_auto_link_flag())
 700         {
 701                 etl::handle<Duck> start_duck(get_work_area()->find_duck(bline.front().get_vertex(),radius,Duck::TYPE_VERTEX));
 702                 etl::handle<Duck> finish_duck(get_work_area()->find_duck(bline.back().get_vertex(),radius,Duck::TYPE_VERTEX));
 703
 704                 // check whether the start of the new line extends an
 705                 // existing line.  this is only the case if the new
 706                 // line isn't a self-contained loop, and if the new
 707                 // line starts at one of the ends of an existing line
 708                 if(start_duck)do
 709                 {
 710                         if(!(start_duck_value_desc=start_duck->get_value_desc()))break;
 711                         if(loop_bline_flag)break;
 712                         if(!start_duck_value_desc.parent_is_value_node())break;
 713                         start_duck_index=start_duck_value_desc.get_index();
 714                         start_duck_value_node_bline=ValueNode_BLine::Handle::cast_dynamic(start_duck_value_desc.get_parent_value_node());
 715                         if(!get_auto_extend_flag())break;
 716
 717                         // don't extend looped blines
 718                         if(start_duck_value_node_bline&&!start_duck_value_node_bline->get_loop()&&
 719                            (start_duck_index==0||start_duck_index==start_duck_value_node_bline->link_count()-1))
 720                         {
 721                                 extend_start=true;
 722                                 shift_offset=true;
 723                                 shift_offset_vector=start_duck->get_origin();
 724                         }
 725                 }while(0);
 726
 727                 // check whether the end of the new line extends an
 728                 // existing line.  this is only the case if the new
 729                 // line isn't a self-contained loop, and if the new
 730                 // line ends at one of the ends of an existing line
 731                 if(finish_duck)do
 732                 {
 733                         if(!(finish_duck_value_desc=finish_duck->get_value_desc()))break;
 734                         if(loop_bline_flag)break;
 735                         if(!finish_duck_value_desc.parent_is_value_node())break;
 736                         finish_duck_index=finish_duck_value_desc.get_index();
 737                         finish_duck_value_node_bline=ValueNode_BLine::Handle::cast_dynamic(finish_duck_value_desc.get_parent_value_node());
 738                         if(!get_auto_extend_flag())break;
 739
 740                         // don't extend looped blines
 741                         if(finish_duck_value_node_bline&&!finish_duck_value_node_bline->get_loop()&&
 742                            (finish_duck_index==0||finish_duck_index==finish_duck_value_node_bline->link_count()-1))
 743                                 if(extend_start)
 744                                 {
 745                                         // we've started and finished drawing at the end of a bline.  we can't
 746                                         // extend both blines, so unless we started and finished at the 2 ends
 747                                         // of the same bline, only extend the one we started on
 748                                         if(start_duck_value_node_bline==finish_duck_value_node_bline)
 749                                                 complete_loop=extend_finish=true;
 750                                 }else{
 751                                         extend_finish=true;
 752                                         shift_offset=true;
 753                                         shift_offset_vector=finish_duck->get_origin();
 754                                 }
 755                 }while(0);
 756
 757                 // if the new line's start didn't extend an existing line,
 758                 // check whether it needs to be linked to an existing duck
 759                 if(!extend_start&&get_auto_link_flag()&&start_duck&&start_duck_value_desc)
 760                         switch(start_duck_value_desc.get_value_type())
 761                         {
 762                         case synfig::ValueBase::TYPE_BLINEPOINT:
 763                                 start_duck_value_desc=synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(start_duck_value_desc.get_value_node()),0);
 764                                 // fall through
 765                         case synfig::ValueBase::TYPE_VECTOR:
 766                                 if (shift_offset && shift_offset_vector != start_duck->get_origin())
 767                                         break;
 768                                 shift_offset = true;
 769                                 shift_offset_vector = start_duck->get_origin();
 770                                 get_canvas_interface()->auto_export(start_duck_value_desc);
 771                                 if (extend_finish)
 772                                         if(start_duck_value_node_bline&&start_duck_value_node_bline==finish_duck_value_node_bline)
 773                                                 extend_finish_join_same=true;
 774                                         else
 775                                                 extend_finish_join_different=true;
 776                                 else
 777                                         join_start_no_extend=true;
 778                                 // fall through
 779                         default:break;
 780                         }
 781
 782                 // if the new line's end didn't extend an existing line,
 783                 // check whether it needs to be linked to an existing duck
 784                 if(!extend_finish&&get_auto_link_flag()&&finish_duck&&finish_duck_value_desc)
 785                         switch(finish_duck_value_desc.get_value_type())
 786                         {
 787                         case synfig::ValueBase::TYPE_BLINEPOINT:
 788                                 finish_duck_value_desc=synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(finish_duck_value_desc.get_value_node()),0);
 789                                 // fall through
 790                         case synfig::ValueBase::TYPE_VECTOR:
 791                                 if (shift_offset && shift_offset_vector != finish_duck->get_origin())
 792                                         break;
 793                                 shift_offset = true;
 794                                 shift_offset_vector = finish_duck->get_origin();
 795                                 get_canvas_interface()->auto_export(finish_duck_value_desc);
 796                                 if(extend_start)
 797                                         if(finish_duck_value_node_bline&&start_duck_value_node_bline==finish_duck_value_node_bline)
 798                                                 extend_start_join_same=true;
 799                                         else
 800                                                 extend_start_join_different=true;
 801                                 else
 802                                         join_finish_no_extend=true;
 803                                 // fall through
 804                         default:break;
 805                         }
 806         }
 807
 808         ValueNode_BLine::Handle value_node;
 809         std::list<synfig::BLinePoint> trans_bline;
 810
 811         {
 812                 std::list<synfig::BLinePoint>::iterator iter;
 813                 const synfig::TransformStack& transform(get_canvas_view()->get_curr_transform_stack());
 814
 815                 for(iter=bline.begin();iter!=bline.end();++iter)
 816                 {
 817                         BLinePoint bline_point(*iter);
 818                         Point new_vertex(transform.unperform(bline_point.get_vertex()));
 819
 820                         bline_point.set_tangent1(
 821                                 transform.unperform(
 822                                         bline_point.get_tangent1()+bline_point.get_vertex()
 823                                 ) -new_vertex
 824                         );
 825
 826                         bline_point.set_tangent2(
 827                                 transform.unperform(
 828                                         bline_point.get_tangent2()+bline_point.get_vertex()
 829                                 ) -new_vertex
 830                         );
 831
 832                         if (shift_offset)
 833                                 new_vertex=new_vertex-shift_offset_vector;
 834
 835                         bline_point.set_vertex(new_vertex);
 836
 837                         trans_bline.push_back(bline_point);
 838                 }
 839                 value_node=ValueNode_BLine::create(synfig::ValueBase(trans_bline,loop_bline_flag));
 840         }
 841
 842         Smach::event_result result;
 843         synfig::ValueNode_DynamicList::ListEntry source;
 844         int target_index;
 845
 846         // the new line's start extends an existing line
 847         if(extend_start)
 848         {
 849                 if(complete_loop)trans_bline.pop_back();
 850                 trans_bline.pop_front();
 851                 if(start_duck_index==0)
 852                 {       // We need to reverse the BLine first.
 853                         reverse_bline(trans_bline);
 854                         result=extend_bline_from_begin(start_duck_value_node_bline,trans_bline,complete_loop);
 855                         source=start_duck_value_node_bline->list.front();
 856                         target_index=trans_bline.size()+finish_duck_index;
 857                 }
 858                 else
 859                 {
 860                         result=extend_bline_from_end(start_duck_value_node_bline,trans_bline,complete_loop);
 861                         source=start_duck_value_node_bline->list.back();
 862                         target_index=finish_duck_index;
 863                 }
 864
 865                 if(extend_start_join_different)
 866                         LinkableValueNode::Handle::cast_dynamic(source.value_node)->
 867                                 set_link(0,finish_duck_value_desc.get_value_node());
 868                 else if(extend_start_join_same)
 869                         LinkableValueNode::Handle::cast_dynamic(source.value_node)->
 870                                 set_link(0,synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(start_duck_value_node_bline->
 871                                                                                                         list[target_index].value_node),0).get_value_node());
 872                 return result;
 873         }
 874
 875         // the new line's end extends an existing line
 876         if(extend_finish)
 877         {       // SPECIAL CASE -- EXTENSION
 878                 trans_bline.pop_back();
 879                 if(finish_duck_index==0)
 880                 {
 881                         result=extend_bline_from_begin(finish_duck_value_node_bline,trans_bline,false);
 882                         source=finish_duck_value_node_bline->list.front();
 883                         target_index=trans_bline.size()+start_duck_index;
 884                 }
 885                 else
 886                 {       // We need to reverse the BLine first.
 887                         reverse_bline(trans_bline);
 888                         result=extend_bline_from_end(finish_duck_value_node_bline,trans_bline,false);
 889                         source=finish_duck_value_node_bline->list.back();
 890                         target_index=start_duck_index;
 891                 }
 892
 893                 if(extend_finish_join_different)
 894                         LinkableValueNode::Handle::cast_dynamic(source.value_node)->
 895                                 set_link(0,start_duck_value_desc.get_value_node());
 896                 else if(extend_finish_join_same)
 897                         LinkableValueNode::Handle::cast_dynamic(source.value_node)->
 898                                 set_link(0,synfigapp::ValueDesc(LinkableValueNode::Handle::cast_dynamic(finish_duck_value_node_bline->
 899                                                                                                         list[target_index].value_node),0).get_value_node());
 900                 return result;
 901         }
 902
 903         if (join_start_no_extend)
 904                 LinkableValueNode::Handle::cast_dynamic(value_node->list.front().value_node)->
 905                   set_link(0,start_duck_value_desc.get_value_node());
 906
 907         if (join_finish_no_extend)
 908                 LinkableValueNode::Handle::cast_dynamic(value_node->list.back().value_node)->
 909                   set_link(0,finish_duck_value_desc.get_value_node());
 910
 911         // Create the layer
 912         {
 913                 Layer::Handle layer;
 914                 Canvas::Handle canvas(get_canvas_view()->get_canvas());
 915                 int depth(0);
 916
 917                 // we are temporarily using the layer to hold something
 918                 layer=get_canvas_view()->get_selection_manager()->get_selected_layer();
 919                 if(layer)
 920                 {
 921                         depth=layer->get_depth();
 922                         canvas=layer->get_canvas();
 923                 }
 924
 925                 //int number(synfig::UniqueID().get_uid());
 926
 927                 synfigapp::PushMode push_mode(get_canvas_interface(),synfigapp::MODE_NORMAL);
 928
 929                 if(get_region_only_flag())
 930                         layer=get_canvas_interface()->add_layer_to("region",canvas,depth);
 931                 else
 932                         layer=get_canvas_interface()->add_layer_to("outline",canvas,depth);
 933
 934                 if(get_feather())
 935                 {
 936                         layer->set_param("feather",get_feather());
 937                         get_canvas_interface()->signal_layer_param_changed()(layer,"feather");
 938                 }
 939                 assert(layer);
 940                 //layer->set_description(strprintf("Stroke %d",number));
 941                 //get_canvas_interface()->signal_layer_new_description()(layer,layer->get_description());
 942
 943                 if (shift_offset)
 944                         get_canvas_interface()->
 945                           change_value(synfigapp::ValueDesc(layer,"offset"),shift_offset_vector);
 946
 947                 synfigapp::Action::Handle action(synfigapp::Action::create("layer_param_connect"));
 948
 949                 assert(action);
 950
 951                 action->set_param("canvas",get_canvas());
 952                 action->set_param("canvas_interface",get_canvas_interface());
 953                 action->set_param("layer",layer);
 954                 if(!action->set_param("param",String("bline")))
 955                         synfig::error("LayerParamConnect didn't like \"param\"");
 956                 if(!action->set_param("value_node",ValueNode::Handle(value_node)))
 957                         synfig::error("LayerParamConnect didn't like \"value_node\"");
 958
 959                 if(!get_canvas_interface()->get_instance()->perform_action(action))
 960                 {
 961                         get_canvas_view()->get_ui_interface()->error(_("Unable to create layer"));
 962                         group.cancel();
 963                         //refresh_ducks();
 964                         return Smach::RESULT_ERROR;
 965                 }
 966                 get_canvas_view()->get_selection_manager()->set_selected_layer(layer);
 967                 //refresh_ducks();
 968         }
 969
 970         last_stroke=value_node;
 971         return Smach::RESULT_ACCEPT;
 972 }
 973
 974 Smach::event_result
 975 StateDraw_Context::new_region(std::list<synfig::BLinePoint> bline, synfig::Real radius)
 976 {
 977         // Create the action group
 978         synfigapp::Action::PassiveGrouper group(get_canvas_interface()->get_instance().get(),_("Define Region"));
 979
 980         std::list<synfigapp::ValueDesc> vertex_list;
 981
 982         // First we need to come up with a rough list of
 983         // BLinePoints that we are going to be using to
 984         // define our region.
 985         {
 986                 std::list<synfig::BLinePoint>::iterator iter;
 987                 for(iter=bline.begin();iter!=bline.end();++iter)
 988                 {
 989                         etl::handle<Duck> duck(get_work_area()->find_duck(iter->get_vertex(),0,Duck::TYPE_VERTEX));
 990
 991                         if(!duck)
 992                         {
 993                                 synfig::info(__FILE__":%d: Nothing to enclose!",__LINE__);
 994                                 return Smach::RESULT_OK;
 995                         }
 996
 997
 998                         assert(duck->get_type()==Duck::TYPE_VERTEX);
 999
1000                         synfigapp::ValueDesc value_desc(duck->get_value_desc());
1001
1002                         if(!value_desc)
1003                         {
1004                                 synfig::info(__FILE__":%d: Got a hit, but no ValueDesc on this duck",__LINE__);
1005                                 continue;
1006                         }
1007
1008                         switch(value_desc.get_value_type())
1009                         {
1010                         case synfig::ValueBase::TYPE_BLINEPOINT:
1011                                 //if(vertex_list.empty() || value_desc!=vertex_list.back())
1012                                 vertex_list.push_back(value_desc);
1013                                 assert(vertex_list.back().is_valid());
1014
1015                                 break;
1016                         default:
1017                                 break;
1018                         }
1019                 }
1020         }
1021
1022         if(vertex_list.size()<=2)
1023         {
1024                 synfig::info(__FILE__":%d: Vertex list too small to make region.",__LINE__);
1025                 return Smach::RESULT_OK;
1026         }
1027
1028         assert(vertex_list.back().is_valid());
1029
1030         // Remove any duplicates
1031         {
1032         }
1033
1034         // Now we need to clean the list of vertices up
1035         // a bit. This includes inserting missing vertices
1036         // and removing extraneous ones.
1037         // We can do this in multiple passes.
1038         int i=0;
1039         for(bool done=false;!done && i<30;i++)
1040         {
1041                 // Set done to "true" for now. If
1042                 // any updates are performed, we will
1043                 // change it back to false.
1044                 done=true;
1045
1046                 std::list<synfigapp::ValueDesc>::iterator prev,iter,next;
1047                 prev=vertex_list.end();prev--;  // Set prev to the last ValueDesc
1048                 next=vertex_list.begin();
1049                 iter=next++; // Set iter to the first value desc, and next to the second
1050
1051                 for(;iter!=vertex_list.end();prev=iter,iter=next++)
1052                 {
1053                         synfigapp::ValueDesc value_prev(*prev);
1054                         synfigapp::ValueDesc value_desc(*iter);
1055                         synfigapp::ValueDesc value_next((next==vertex_list.end())?vertex_list.front():*next);
1056
1057                         assert(value_desc.is_valid());
1058                         assert(value_next.is_valid());
1059                         assert(value_prev.is_valid());
1060
1061                         //synfig::info("-------");
1062                         //synfig::info(__FILE__":%d: value_prev 0x%08X:%d",__LINE__,value_prev.get_parent_value_node().get(),value_prev.get_index());
1063                         //synfig::info(__FILE__":%d: value_desc 0x%08X:%d",__LINE__,value_desc.get_parent_value_node().get(),value_desc.get_index());
1064                         //synfig::info(__FILE__":%d: value_next 0x%08X:%d",__LINE__,value_next.get_parent_value_node().get(),value_next.get_index());
1065
1066                         /*
1067                         if(value_prev.parent_is_value_node() && value_desc.parent_is_value_node() && value_next.parent_is_value_node())
1068                         {
1069                                 // Remove random extraneous vertices
1070                                 if(value_prev.get_parent_value_node()==value_next.get_parent_value_node() &&
1071                                         value_prev.get_parent_value_node()!=value_desc.get_parent_value_node())
1072                                 {
1073                                         DEBUGPOINT();
1074                                         vertex_list.erase(iter);
1075                                         done=false;
1076                                         break;
1077                                 }
1078                         }
1079                         */
1080
1081                         // Remove duplicate vertices
1082                         if(value_prev.get_value_node()==value_desc.get_value_node()
1083                                 || value_desc.get_value_node()==value_next.get_value_node())
1084                         {
1085                                 DEBUGPOINT();
1086                                 vertex_list.erase(iter);
1087                                 done=false;
1088                                 break;
1089                         }
1090                         if(value_prev.get_value_node()==value_next.get_value_node())
1091                         {
1092                                 DEBUGPOINT();
1093                                 vertex_list.erase(prev);
1094                                 done=false;
1095                                 break;
1096                         }
1097
1098                         if(value_desc.parent_is_value_node() && value_next.parent_is_value_node())
1099                         if(value_desc.get_parent_value_node()==value_next.get_parent_value_node() && (next!=vertex_list.end()))
1100                         {
1101                                 // Fill in missing vertices
1102                                 if(value_desc.get_index()<value_next.get_index()-1)
1103                                 {
1104                                         DEBUGPOINT();
1105                                         vertex_list.insert(next,synfigapp::ValueDesc(value_desc.get_parent_value_node(),value_desc.get_index()+1));
1106                                         done=false;
1107                                         break;
1108                                 }
1109                                 if(value_next.get_index()<value_desc.get_index()-1)
1110                                 {
1111                                         DEBUGPOINT();
1112                                         vertex_list.insert(next,synfigapp::ValueDesc(value_desc.get_parent_value_node(),value_next.get_index()+1));
1113                                         done=false;
1114                                         break;
1115                                 }
1116                         }
1117
1118                         // Ensure that connections
1119                         // between blines are properly
1120                         // connected
1121                         if(value_desc.parent_is_value_node() && value_next.parent_is_value_node())
1122                         if(value_desc.get_parent_value_node()!=value_next.get_parent_value_node() &&
1123                                 value_desc.get_value_node()!=value_next.get_value_node())
1124                         {
1125                                 BLinePoint vertex(value_desc.get_value(get_time()).get(BLinePoint()));
1126                                 BLinePoint vertex_next(value_next.get_value(get_time()).get(BLinePoint()));
1127
1128                                 //synfig::info("--------");
1129                                 //synfig::info(__FILE__":%d: vertex: [%f, %f]",__LINE__,vertex.get_vertex()[0],vertex.get_vertex()[1]);
1130                                 //synfig::info(__FILE__":%d: vertex_next: [%f, %f]",__LINE__,vertex_next.get_vertex()[0],vertex_next.get_vertex()[1]);
1131
1132                                 if((vertex.get_vertex()-vertex_next.get_vertex()).mag_squared()<radius*radius)
1133                                 {
1134                                         DEBUGPOINT();
1135                                         ValueNode_Composite::Handle value_node;
1136                                         ValueNode_Composite::Handle value_node_next;
1137                                         value_node=ValueNode_Composite::Handle::cast_dynamic(value_desc.get_value_node().clone());
1138                                         value_node_next=ValueNode_Composite::Handle::cast_dynamic(value_next.get_value_node().clone());
1139                                         if(!value_node || !value_node_next)
1140                                         {
1141                                                 synfig::info(__FILE__":%d: Unable to properly connect blines.",__LINE__);
1142                                                 continue;
1143                                         }
1144                                         DEBUGPOINT();
1145                                         value_node->set_link(5,value_node_next->get_link(5));
1146                                         value_node->set_link(3,ValueNode_Const::create(true));
1147
1148                                         get_canvas_interface()->auto_export(value_node);
1149                                         assert(value_node->is_exported());
1150                                         *iter=synfigapp::ValueDesc(get_canvas(),value_node->get_id());
1151                                         vertex_list.erase(next);
1152                                         done=false;
1153                                         break;
1154                                 }
1155                                 else
1156                                 {
1157                                         DEBUGPOINT();
1158                                         bool positive_trend(value_desc.get_index()>value_prev.get_index());
1159
1160                                         if(!positive_trend && value_desc.get_index()>0)
1161                                         {
1162                                                 DEBUGPOINT();
1163                                                 vertex_list.insert(next,synfigapp::ValueDesc(value_desc.get_parent_value_node(),value_desc.get_index()-1));
1164                                                 done=false;
1165                                                 break;
1166                                         }
1167                                         if(positive_trend && value_desc.get_index()<LinkableValueNode::Handle::cast_static(value_desc.get_value_node())->link_count()-1)
1168                                         {
1169                                                 DEBUGPOINT();
1170                                                 vertex_list.insert(next,synfigapp::ValueDesc(value_desc.get_parent_value_node(),value_desc.get_index()+1));
1171                                                 done=false;
1172                                                 break;
1173                                         }
1174                                 }
1175
1176                         }
1177                 }
1178         }
1179
1180         if(vertex_list.size()<=2)
1181         {
1182                 synfig::info(__FILE__":%d: Vertex list too small to make region.",__LINE__);
1183                 return Smach::RESULT_OK;
1184         }
1185
1186         ValueNode_BLine::Handle value_node_bline;
1187
1188         // Now we need to test for the trivial case,
1189         // which is where all of the vertices
1190         // come from one BLine.
1191         if(vertex_list.front().parent_is_linkable_value_node())
1192         {
1193                 bool trivial_case(true);
1194                 ValueNode::Handle trivial_case_value_node;
1195
1196                 trivial_case_value_node=vertex_list.front().get_parent_value_node();
1197
1198                 std::list<synfigapp::ValueDesc>::iterator iter;
1199                 for(iter=vertex_list.begin();iter!=vertex_list.end();++iter)
1200                 {
1201                         if(trivial_case_value_node!=iter->get_parent_value_node())
1202                         {
1203                                 trivial_case=false;
1204                                 break;
1205                         }
1206                 }
1207                 if(trivial_case)
1208                         value_node_bline=ValueNode_BLine::Handle::cast_dynamic(trivial_case_value_node);
1209         }
1210
1211         // If we aren't the trivial case,
1212         // then go ahead and create the new
1213         // BLine value node
1214         if(!value_node_bline)
1215         {
1216                 value_node_bline=ValueNode_BLine::create();
1217
1218                 std::list<synfigapp::ValueDesc>::iterator iter;
1219                 for(iter=vertex_list.begin();iter!=vertex_list.end();++iter)
1220                 {
1221                         // Ensure that the vertex is exported.
1222                         get_canvas_interface()->auto_export(*iter);
1223
1224                         value_node_bline->add(iter->get_value_node());
1225                         //value_node_bline->add(ValueNode_BLine::ListEntry(iter->get_value_node()));
1226                 }
1227
1228                 value_node_bline->set_loop(true);
1229         }
1230
1231         get_canvas_interface()->auto_export(value_node_bline);
1232
1233         // Now we create the region layer
1234         // Create the layer
1235         {
1236                 Layer::Handle layer;
1237                 Canvas::Handle canvas(get_canvas_view()->get_canvas());
1238                 int depth(0);
1239
1240                 // we are temporarily using the layer to hold something
1241                 layer=get_canvas_view()->get_selection_manager()->get_selected_layer();
1242                 if(layer)
1243                 {
1244                         depth=layer->get_depth();
1245                         canvas=layer->get_canvas();
1246                 }
1247
1248                 synfigapp::PushMode push_mode(get_canvas_interface(),synfigapp::MODE_NORMAL);
1249
1250                 layer=get_canvas_interface()->add_layer_to("region",canvas,depth);
1251                 assert(layer);
1252                 layer->set_param("color",synfigapp::Main::get_background_color());
1253                 if(get_feather())
1254                 {
1255                         layer->set_param("feather",get_feather());
1256                         get_canvas_interface()->signal_layer_param_changed()(layer,"feather");
1257                 }
1258                 get_canvas_interface()->signal_layer_param_changed()(layer,"color");
1259
1260                 synfigapp::Action::Handle action(synfigapp::Action::create("layer_param_connect"));
1261
1262                 assert(action);
1263
1264                 action->set_param("canvas",get_canvas());
1265                 action->set_param("canvas_interface",get_canvas_interface());
1266                 action->set_param("layer",layer);
1267                 if(!action->set_param("param",String("bline")))
1268                         synfig::error("LayerParamConnect didn't like \"param\"");
1269                 if(!action->set_param("value_node",ValueNode::Handle(value_node_bline)))
1270                         synfig::error("LayerParamConnect didn't like \"value_node\"");
1271
1272                 if(!get_canvas_interface()->get_instance()->perform_action(action))
1273                 {
1274                         get_canvas_view()->get_ui_interface()->error(_("Unable to create Region layer"));
1275                         group.cancel();
1276                         return Smach::RESULT_ERROR;
1277                 }
1278                 get_canvas_view()->get_selection_manager()->set_selected_layer(layer);
1279         }
1280
1281         return Smach::RESULT_ACCEPT;
1282 }
1283
1284 void
1285 StateDraw_Context::refresh_ducks()
1286 {
1287         get_canvas_view()->queue_rebuild_ducks();
1288 /*
1289         get_work_area()->clear_ducks();
1290
1291
1292         std::list< etl::smart_ptr<std::list<synfig::Point> > >::iterator iter;
1293
1294         for(iter=stroke_list.begin();iter!=stroke_list.end();++iter)
1295         {
1296                 get_work_area()->add_stroke(*iter);
1297         }
1298
1299         get_work_area()->queue_draw();
1300 */
1301 }
1302
1303
1304 Smach::event_result
1305 StateDraw_Context::extend_bline_from_begin(ValueNode_BLine::Handle value_node,std::list<synfig::BLinePoint> bline,bool complete_loop)
1306 {
1307         // Create the action group
1308         synfigapp::Action::PassiveGrouper group(get_canvas_interface()->get_instance().get(),_("Extend BLine"));
1309
1310         if (complete_loop)
1311         {
1312                 synfigapp::Action::Handle action(synfigapp::Action::create("value_node_dynamic_list_loop"));
1313                 assert(action);
1314
1315                 action->set_param("canvas",get_canvas());
1316                 action->set_param("canvas_interface",get_canvas_interface());
1317                 action->set_param("value_node",ValueNode::Handle(value_node));
1318
1319                 if(!get_canvas_interface()->get_instance()->perform_action(action))
1320                 {
1321                         get_canvas_view()->get_ui_interface()->error(_("Unable to set loop for bline"));
1322                         group.cancel();
1323                         return Smach::RESULT_ERROR;
1324                 }
1325         }
1326
1327         std::list<synfig::BLinePoint>::reverse_iterator iter;
1328         for(iter=bline.rbegin();!(iter==bline.rend());++iter)
1329         {
1330                 ValueNode_Composite::Handle composite(ValueNode_Composite::create(*iter));
1331
1332                 synfigapp::Action::Handle action(synfigapp::Action::create("value_node_dynamic_list_insert"));
1333
1334                 assert(action);
1335                 synfigapp::ValueDesc value_desc(value_node,0);
1336
1337                 action->set_param("canvas",get_canvas());
1338                 action->set_param("canvas_interface",get_canvas_interface());
1339                 action->set_param("value_desc",value_desc);
1340                 if(!action->set_param("item",ValueNode::Handle(composite)))
1341                         synfig::error("ACTION didn't like \"item\"");
1342
1343                 if(!get_canvas_interface()->get_instance()->perform_action(action))
1344                 {
1345                         get_canvas_view()->get_ui_interface()->error(_("Unable to insert item"));
1346                         group.cancel();
1347                         //refresh_ducks();
1348                         return Smach::RESULT_ERROR;
1349                 }
1350         }
1351         last_stroke=value_node;
1352         return Smach::RESULT_ACCEPT;
1353 }
1354
1355 Smach::event_result
1356 StateDraw_Context::extend_bline_from_end(ValueNode_BLine::Handle value_node,std::list<synfig::BLinePoint> bline,bool complete_loop)
1357 {
1358         // Create the action group
1359         synfigapp::Action::PassiveGrouper group(get_canvas_interface()->get_instance().get(),_("Extend BLine"));
1360
1361         if (complete_loop)
1362         {
1363                 synfigapp::Action::Handle action(synfigapp::Action::create("value_node_dynamic_list_loop"));
1364                 assert(action);
1365
1366                 action->set_param("canvas",get_canvas());
1367                 action->set_param("canvas_interface",get_canvas_interface());
1368                 action->set_param("value_node",ValueNode::Handle(value_node));
1369
1370                 if(!get_canvas_interface()->get_instance()->perform_action(action))
1371                 {
1372                         get_canvas_view()->get_ui_interface()->error(_("Unable to set loop for bline"));
1373                         group.cancel();
1374                         return Smach::RESULT_ERROR;
1375                 }
1376         }
1377
1378         std::list<synfig::BLinePoint>::iterator iter;
1379         for(iter=bline.begin();iter!=bline.end();++iter)
1380         {
1381                 ValueNode_Composite::Handle composite(ValueNode_Composite::create(*iter));
1382
1383                 synfigapp::Action::Handle action(synfigapp::Action::create("value_node_dynamic_list_insert"));
1384
1385                 assert(action);
1386                 synfigapp::ValueDesc value_desc(value_node,value_node->link_count());
1387
1388                 action->set_param("canvas",get_canvas());
1389                 action->set_param("canvas_interface",get_canvas_interface());
1390                 action->set_param("value_desc",value_desc);
1391                 if(!action->set_param("item",ValueNode::Handle(composite)))
1392                         synfig::error("ACTION didn't like \"item\"");
1393
1394                 if(!get_canvas_interface()->get_instance()->perform_action(action))
1395                 {
1396                         get_canvas_view()->get_ui_interface()->error(_("Unable to insert item"));
1397                         group.cancel();
1398                         //refresh_ducks();
1399                         return Smach::RESULT_ERROR;
1400                 }
1401         }
1402         last_stroke=value_node;
1403         return Smach::RESULT_ACCEPT;
1404 }
1405
1406 void
1407 StateDraw_Context::reverse_bline(std::list<synfig::BLinePoint> &bline)
1408 {
1409         int i;
1410
1411         std::list<synfig::BLinePoint>::iterator iter,eiter;
1412         iter=bline.begin();
1413         eiter=bline.end();
1414         eiter--;
1415         for(i=0;i<(int)bline.size()/2;++iter,--eiter,i++)
1416         {
1417                 iter_swap(iter,eiter);
1418                 iter->reverse();
1419                 eiter->reverse();
1420         }
1421 }
1422
1423 void
1424 StateDraw_Context::fill_last_stroke()
1425 {
1426         if(!last_stroke)
1427                 return;
1428
1429         synfigapp::Action::PassiveGrouper group(get_canvas_interface()->get_instance().get(),_("Fill Stroke"));
1430
1431         Layer::Handle layer;
1432
1433         get_canvas_interface()->auto_export(last_stroke);
1434
1435         synfigapp::PushMode push_mode(get_canvas_interface(),synfigapp::MODE_NORMAL);
1436
1437         layer=get_canvas_interface()->add_layer("region");
1438         assert(layer);
1439         layer->set_param("color",synfigapp::Main::get_background_color());
1440
1441         synfigapp::Action::Handle action(synfigapp::Action::create("layer_param_connect"));
1442
1443         assert(action);
1444
1445         action->set_param("canvas",get_canvas());
1446         action->set_param("canvas_interface",get_canvas_interface());
1447         action->set_param("layer",layer);
1448         if(!action->set_param("param",String("segment_list")))
1449                 synfig::error("LayerParamConnect didn't like \"param\"");
1450         if(!action->set_param("value_node",ValueNode::Handle(last_stroke)))
1451                 synfig::error("LayerParamConnect didn't like \"value_node\"");
1452
1453         if(!get_canvas_interface()->get_instance()->perform_action(action))
1454         {
1455                 get_canvas_view()->get_ui_interface()->error(_("Unable to create Region layer"));
1456                 group.cancel();
1457                 return;
1458         }
1459         get_canvas_view()->get_selection_manager()->set_selected_layer(layer);
1460 }